Before we click "Download," gather these items:
Once finished, you will see a big Green Circle saying "Download Ok".
Advanced users can edit the scatter file for specialized tasks:
Warning: Editing the 6765 scatter file incorrectly will cause a brick. Always keep a backup of the original scatter file.
The MT6765 chipset uses a specific partition layout:
A generic scatter file from another chipset (e.g., MT6762 or MT6763) will not work. Using the wrong scatter file can hard-brick your device beyond recovery.
Q1: Can I use the same scatter file for MT6765 and MT6762?
No. The memory addresses differ significantly. Using the wrong file will cause a DRAM error.
Q2: My phone has a locked bootloader. Can I still do a scatter install?
Yes. SP Flash Tool works regardless of bootloader status, but you cannot flash custom images signed by the original manufacturer.
Q3: Does a scatter file install wipe my data?
Only if you select "Firmware Upgrade" or "Format All + Download." "Download Only" preserves user data.
Q4: Where can I download the MT6765 USB drivers?
From MediaTek’s official site or XDA Developers forums. Avoid driver installers from unknown YouTube links.
Q5: What is the difference between 6765 scatter file and 6765 DA file?
The scatter file maps partitions; the DA (Download Agent) is a small program that runs on the phone’s RAM to facilitate communication. Both are required for SP Flash Tool.
Final word: A successful 6765 scatter file install transforms a non-responsive device into a fully functional phone. Follow this guide to the letter, and you’ll master the process in under 30 minutes.
Last updated: October 2025. Compatible with SP Flash Tool v5.2316 and newer.
The MT6765 scatter file is a critical text-based configuration file used by the SP Flash Tool to communicate with devices powered by the MediaTek MT6765 (Helio P35) chipset. It acts as a map, defining the device's partition layout—including the start address and length of areas like the preloader, recovery, and system partitions—so the tool knows exactly where to write firmware data. Prerequisites for Installation
Before attempting to flash or "install" using a scatter file, ensure you have the following:
MediaTek VCOM Drivers: Essential for your PC to detect the device in "Boot ROM" (BROM) or "Preloader" mode.
SP Flash Tool: Use a version compatible with your device; later versions are generally recommended for advanced processors. 6765 scatter file install
Device Firmware: A stock ROM or firmware package specifically for your exact device model. This folder must contain the MT6765_Android_scatter.txt file and its corresponding image files (e.g., preloader.bin, boot.img). Step-by-Step Flashing Guide
Launch SP Flash Tool: Open flash_tool.exe on your PC, preferably as an administrator. Load the Scatter File: Navigate to the Download tab. Click the choose button next to Scatter-loading File.
Locate and select the MT6765_Android_scatter.txt file from your firmware folder. Configure Flash Settings:
Mode Selection: Ensure Download Only is selected. Avoid "Format All + Download" as it can delete sensitive IMEI and NVRAM data.
Partition Selection: The tool will automatically tick relevant boxes (preloader, boot, system, etc.). You can manually untick partitions you do not wish to flash. Initiate Flashing: Click the Download button at the top. Power off your device completely.
Connect the device to your PC via USB. Depending on the device, you may need to hold the Volume Up or Volume Down key during connection to ensure detection.
Complete the Process: A progress bar will fill. Once finished, a green circle with a tick will appear. You can then disconnect and reboot your device. Critical Safety Tips
Backup Data: Flashing often wipes personal data. Always backup important files before starting.
Battery Level: Ensure your device has at least 70% battery to prevent it from powering off during the process, which could lead to a permanent brick.
Exact Matching: Never use a scatter file or firmware intended for a different model. Even small variations in hardware can lead to device failure.
Are you troubleshooting a specific error like "BROM Error" or "Status Scatter File Invalid" during the process?
[Revised] How to use SP Flash tool to flash Mediatek firmware
The primary tool for interacting with a scatter file is the SP Flash Tool. To begin the installation process, a user must first ensure they have the correct VCOM drivers installed on their computer. These drivers allow the PC to recognize the MT6765 hardware while it is in a "Preloader" state. Without the proper handshake between the hardware and the software, the flashing process cannot initiate, often resulting in connection errors or "timeout" messages.
Once the environment is prepared, the user loads the MT6765 scatter file into the SP Flash Tool. This action populates the software's interface with a list of partitions and their corresponding binary images. It is vital to verify that the scatter file matches the specific device model; using a file intended for a different MT6765 variant can result in a "hard brick," rendering the phone completely unresponsive. Professionals recommend double-checking the "Config" and "Linear Start Address" within the file to ensure they align with the device's hardware revision.
The final stage of the installation involves connecting the device in a powered-off state while holding a specific key combination, usually Volume Up or Down. Upon connection, the SP Flash Tool reads the scatter map and begins pushing the data to the eMMC or UFS storage. A successful installation is signaled by a green checkmark, indicating that the partition table has been updated or restored. Ultimately, the 6765 scatter file is the bridge between raw code and functional hardware, serving as the essential blueprint for MediaTek device maintenance.
How to Use a 6765 Scatter File: A Complete Guide to Flashing MT6765 Devices Before we click "Download," gather these items:
If you are looking to unbrick, update, or install custom firmware on a device powered by the MediaTek MT6765 chipset (commonly known as the Helio P35 or G35), the 6765 scatter file is your most important tool.
This file acts as a map for your phone’s memory, telling flashing tools exactly where each piece of software belongs. Here is a straightforward guide on how to find and install a 6765 scatter file safely. What is a 6765 Scatter File?
A scatter file is a text document (usually named MT6765_Android_scatter.txt) used by MediaTek flashing software. It contains the memory structure of the device’s NAND or eMMC flash memory. Without it, your computer cannot communicate with the phone’s partitions (like system, recovery, or boot). Prerequisites Before you begin, ensure you have the following:
SP Flash Tool: The official software used for MediaTek devices.
VCOM Drivers: Essential for your Windows PC to recognize the phone in "Preloader" mode.
Firmware Package: A stock ROM specifically for your device model that includes the 6765 scatter file.
Battery Charge: At least 50% to prevent the phone from dying mid-flash. Step-by-Step Installation Guide 1. Prepare the Files
Extract your downloaded firmware (Stock ROM) and the SP Flash Tool into separate folders on your desktop. Open the firmware folder and verify that the file MT6765_Android_scatter.txt is present. 2. Launch SP Flash Tool
Navigate to the SP Flash Tool folder and run flash_tool.exe as an Administrator. 3. Load the Scatter File
In the SP Flash Tool interface, look for the "Scatter-loading Choice" button on the right side. Click it and navigate to your firmware folder. Select the MT6765_Android_scatter.txt file and click Open.
The tool will now populate a list of partitions (Recovery, Boot, System, etc.) with checkmarks next to them. 4. Configure the Flash Mode You will see a dropdown menu with three options:
Download Only: Use this for minor updates or fixing specific partitions (Recommended).
Firmware Upgrade: Use this if you are changing versions (e.g., Android 10 to 11).
Format All + Download: Warning! This wipes your IMEI and calibration data. Only use this as a last resort for hard-bricked devices. 5. Connect the Device
Click the Download button (green arrow) in the SP Flash Tool. Power off your device completely.
Connect the device to your PC via USB cable while holding the Volume Down or Volume Up button (this varies by manufacturer like Oppo, Vivo, or Samsung). A USB 2
Once the computer detects the phone, a red bar will appear at the bottom of the tool, followed by a yellow bar indicating the flashing process has started. 6. Finalize the Install
Wait for a large green checkmark (Download OK) to appear. This signifies the installation is complete. You can now disconnect your phone and hold the Power button to reboot. Note that the first boot after flashing may take 5–10 minutes. Troubleshooting Common Errors
BROM Error (1001/2004): Usually a driver issue. Reinstall the MediaTek VCOM drivers and try a different USB port.
Scatter File Invalid: Ensure you are using the correct version of SP Flash Tool. Newer MT6765 devices often require SP Flash Tool v5.19 or higher.
Status DA Selection End (0xC0070001): You may need a "Download Agent" (DA) file or an Authentication (Auth) file if your device has a locked bootloader.
Disclaimer: Flashing firmware carries risks. Always backup your data before proceeding, as this process usually wipes the device.
Installing a MT6765 scatter file is a critical step for flashing firmware, unbricking, or updating MediaTek-based Android devices. The scatter file acts as a "map" that tells flashing tools exactly where each part of the firmware (like the bootloader or recovery) belongs on your phone's storage. 1. Prerequisites
Before starting, ensure you have the following essential components: MediaTek VCOM Drivers
: These must be installed on your PC so the software can communicate with your phone while it's powered off. SP Flash Tool : Download and extract the latest version of the Smartphone Flash Tool Stock Firmware
: A firmware package specifically for your exact device model. Inside this folder, you will find the text file named something like MT6765_Android_scatter.txt 2. Preparing the SP Flash Tool Mediatek ROM Flashing Guide | PDF - Scribd
The MT6765 scatter file is a critical text-based map used to flash firmware onto MediaTek (MTK) Android devices like the LG Stylo 6 or various Oppo models. It defines the partition layout—including the preloader, recovery, and system partitions—telling tools like SP Flash Tool exactly where each file should be written in the device's eMMC storage. Essential Prerequisites
Before attempting an install, you must have the following components:
MediaTek USB VCOM Drivers: Essential for your PC to communicate with the phone while it's powered off.
SP Flash Tool: The primary software for flashing scatter-based firmware.
Stock Firmware: A package containing the .txt scatter file and associated partition images (e.g., recovery.img, system.img) for your exact phone model. Installation Steps Using SP Flash Tool How To Flash MediaTek Phones Using SP Flash Tool