Airbot Supersonics Manual May 2026

To follow this Airbot Supersonics manual, you must identify the key components:

Note: The "Supersonics" name refers to the high-frequency motor. Ensure the main power switch is not in the "Off" position when the robot is on the dock.

Empty dustbin – After each use or when full.
Clean HEPA filter – Rinse with water every 2 weeks; dry completely before reinserting.
Remove tangled hair from main brush and side brushes weekly.
Wipe sensors (bottom/cliff sensors) with a dry cloth to prevent navigation errors.

Replace parts every 3–6 months:

This section of your Airbot Supersonics manual clarifies the different cleaning modes:

| Mode | Activation Method | Best Use Case | | :--- | :--- | :--- | | Auto Mode | Press the "Play" button once | Daily cleaning; robot decides the route | | Spot Mode | Press "Spot" button on remote/app | Spilled cereal or dirt in a 3ft radius | | Edge Mode | Select "Edge" in the app | Baseboards and wall perimeters | | Max Suction | App setting (4000Pa) | High-pile carpets and rugs | | Quiet Mode | App setting | Night cleaning or hardwood floors |

Pro Tip: For the first 3 runs, use Auto Mode only. Do not intervene. This allows the Supersonics to build a complete map. airbot supersonics manual

Model: Supersonics Series (e.g., S10 / S20 / Pro)
Read this manual carefully before use. Keep it for future reference.

| Problem | Possible Cause | Solution | |---------|----------------|----------| | Not charging | Poor contact / outlet issue | Clean charging contacts; check power | | Stops suddenly | Obstacle or cliff detected | Remove obstruction; reset on flat floor | | Low suction | Filter full / dustbin full / brush jam | Clean filter, empty bin, remove tangles | | Won’t turn on | Battery depleted / main switch off | Charge for 30 min first; check underside switch | | Can’t find dock | Dock unplugged or sensors dirty | Reposition dock; clean sensors |

| Parameter | Value | |-----------|-------| | Rated power | 30W – 55W (depending on mode) | | Battery | 2600 mAh Li-ion (up to 120 min run time) | | Dustbin volume | 0.6 L | | Suction power | Up to 3000 Pa (turbo mode) | | Noise level | ≤ 65 dB | | Charging time | ≈ 4–5 hours | To follow this Airbot Supersonics manual , you

Some Airbot Supersonics variants include a mopping tank. If yours has one:

| Mode | How to Activate | Description | |------|----------------|-------------| | Auto | Default startup | Random or systematic path (depending on model) | | Spot | Press + hold power for 3 sec | Concentrated spiral cleaning in a 1m area | | Edge | Use remote (if included) | Follows walls/perimeter | | Turbo / Max | Press turbo button or via app | Maximum suction for deep cleaning |

For smart mapping models: Use the Airbot app to select zone, room, or no-go zones. Note: The "Supersonics" name refers to the high-frequency