Bles01834 Tomb Raider Ps3 3-55 Fix -

Note: This guide reflects PS3 homebrew practices from 2013-2015. Modern CFW (4.8x/4.9x) does not require these patches.

Requirements:

Steps:

Expected Result: The game boots and plays normally, but online features (multiplayer) will likely fail because PSN requires newer firmware.

identifies the European retail version of Tomb Raider (2013) for the PlayStation 3. The "3-55 fix"

refers to a custom patch used by the PS3 homebrew community to allow games requiring higher system firmware (like 4.x) to run on legacy 3.55 Custom Firmware (CFW) Technical Summary : BLES01834 (European release). Original Requirement

: The 2013 Tomb Raider reboot typically requires firmware version or higher to boot from the XMB. : A set of modified files—usually the and associated files—that have been

with lower encryption keys to bypass the firmware version check on 3.55 consoles. Common Issues & Resolutions

If you are attempting to apply this fix or are encountering errors with this specific game ID, consider the following troubleshooting steps: Error 80010017 (Failed to Boot) : This usually means the

was not patched correctly for your specific firmware. Tools like the TrueAncestor Self Resigner can be used to manually re-sign the game files for 3.55. In-Game Crashes

: Users have reported crashes during early cinematics or when using "Save Slot 1". Switching to a different save slot or reinstalling the game data often resolves these hangs. Disc Read Errors : If you encounter error

, it may indicate a physical disc issue or a failing laser rather than a software firmware conflict. Modern Compatibility : If you are using a modern jailbreak like Evilnat 4.9x , this "3-55 fix" is not required

and can actually cause the game to crash. Ensure you are using the original, unpatched files if you are on a firmware version higher than 3.55. Alternative Solutions Update Firmware

: Most modern homebrew users are encouraged to update from 3.55 to a recent CFW like

to gain native support for all games without needing individual "fixes". Webman MOD

or Irisman, as they include built-in "on-the-fly" patching for games that require higher firmware. update your firmware to avoid needing these manual game fixes?

Subject: Fix for Tomb Raider (BLES01834) on PS3 - 3.55 Compatibility Issue

Hello,

I'm reaching out because I'm experiencing issues with "Tomb Raider" on my PS3. The game identifier is BLES01834. I've encountered a problem that seems to be related to the firmware version of my PS3, which is currently on 3.55. There are reports and discussions about fixes and patches for compatibility and performance issues with various games on custom firmware or older versions like 3.55.

Could anyone provide guidance or a direct solution to ensure "Tomb Raider" (BLES01834) works smoothly on a PS3 with firmware 3.55? Any advice on where to find a reliable patch, fix, or even a detailed guide on how to apply a custom fix would be greatly appreciated.

Specific details about the issue you're facing (if you're experiencing a crash, freezing, graphics issues, etc.) would help in getting more precise help.

Thank you for any assistance you can offer.

If you're looking for actual fixes or patches, I recommend checking reputable gaming forums (like the PlayStation subreddit, PlayStation forums, or specialized sites for PS3 homebrew and game fixes). These communities often share and discuss fixes, patches, and workarounds for various issues, including game compatibility with older firmware versions. Always ensure that any patches or fixes you download are from trusted sources to avoid potential security risks.

The "bles01834 tomb raider ps3 3-55 fix" remains a textbook example of the PS3 scene's cat-and-mouse game with Sony. It represents an era where staying on low firmware was sacred, and every major game release required a "3.55 fix" from scene groups like MRTC, Nanashi, or Xeey, often posted on sites like PS3ISO, ConsoleCrunch, or NextGenUpdate.

If you find an old PS3 in your closet still running 3.55, this patch is your ticket to playing Lara Croft's gritty reboot—just don't expect to earn any trophies online.

Disclaimer: This article is for educational and archival purposes only. Modifying your console's firmware and game executables violates Sony's Terms of Service and may void your warranty. Proceed at your own risk.

The BLES01834 code refers to the European retail version of Tomb Raider (2013)

for the PlayStation 3. The "3.55 fix" is a legacy modification required for users on older Custom Firmware (CFW) versions like 3.55, who cannot natively run games requiring higher firmware without modified game files. Understanding the 3.55 Fix Most modern PS3 games (including Tomb Raider 2013

) were designed for firmware 4.00+. The 3.55 fix involves "signing" or "resigning" the game's core execution files—EBOOT.BIN and PARAM.SFO—to bypass the firmware check. Steps to Apply the BLES01834 3.55 Fix

To get the game running on a 3.55 CFW console, follow these general steps:

Locate the Fix Files: You typically need a modified EBOOT.BIN and PARAM.SFO specifically for the BLES01834 version. These are often shared in PS3 homebrew communities like MateoGodlike or Reddit r/ps3homebrew.

Backup Original Files: Before making changes, copy the original EBOOT.BIN and PARAM.SFO from your game folder (usually located in dev_hdd0/GAMES/Tomb Raider/PS3_GAME/USRDIR/) to a safe location on your PC.

Replace Game Files: Overwrite the original files in the game's USRDIR folder with the downloaded 3.55-compatible versions. Adjust Backup Manager Settings: Open your backup manager (such as multiMAN or Irisman). Navigate to Tomb Raider and press Triangle for settings.

Ensure BD Mirror is enabled, even if running from internal storage, to prevent black screens. External/Internal Specifics: Internal HDD: Just copy/paste and run.

External HDD: Ensure the game is in a folder named GAMES on your FAT32-formatted drive. Use "BD Mirror" and "External" settings in multiMAN. Alternative: Updating Your Firmware

Since 3.55 is a very old firmware version, the most reliable "fix" today is to update your console to a modern CFW (like Evilnat 4.90/4.91). Modern CFW supports newer games natively, removing the need for manually resigning files and fixing common issues like the black screen on boot. Dark E-Boot fixer Tutorial for 3.55 an 4.++ CFW's

To clarify:

Writing a full academic-style essay on this would essentially mean documenting a piracy or console-modification workaround, which I cannot do. I don't provide guides for circumventing copy protection, jailbreaking consoles for unauthorized software, or distributing game fixes tied to specific firmware exploits.

If you're interested in a legitimate topic related to Tomb Raider on PS3, such as:

This write-up covers the version of Tomb Raider (2013) for the PlayStation 3, specifically focusing on applying a 3.55 firmware fix

. This process is typically used by those running legacy Custom Firmware (CFW) to ensure the game remains compatible with older system software versions. Game Overview Tomb Raider (Reboot) Product ID: BLES01834 (European/PAL Release) PlayStation 3 Original Firmware Required: The 3.55 Fix Explained

Modern PS3 games are encrypted with keys corresponding to the firmware version they were released on. Because Tomb Raider

was released during the 4.xx firmware era, it will not natively boot on systems running 3.55 CFW. The "fix" involves replacing the original encrypted files with modified versions signed with 3.55-compatible keys. Required Files

To apply this fix, you generally need a modified archive containing: EBOOT.BIN: The main executable for the game. PARAM.SFO:

The configuration file that defines the required system version. .SPRX files:

Various library files (if applicable) that may also require resigning. Installation Instructions Backup Original Files:

Before making any changes, navigate to your game directory (usually dev_hdd0/GAMES/BLES01834/PS3_GAME/USRDIR/ ) and copy the original to a safe location on your PC. Download the Fix:

Locate the specific BLES01834 3.55 fix. Ensure it matches your Region ID exactly, as using a BLUS (US) fix on a BLES (EU) copy can cause crashes or black screens. Replace Files: Transfer the modified files into the Transfer the modified Set Permissions: If using a file manager like , highlight the game, press

, and select "Fix Permissions" to ensure the system can execute the new files. Launch Game: Start the game through your preferred backup manager. Troubleshooting Black Screen on Boot:

Ensure you haven't mixed files from different regions. Also, check if "BD Mirror" or "Internal/External" settings in MultiMAN need to be toggled. Version Error:

If the game still asks for a firmware update, double-check that the has been edited to list as the version.

The "BLES01834 Tomb Raider PS3 3.55 fix" refers to a custom patch or modified file designed to make the 2013 Tomb Raider

reboot compatible with older PlayStation 3 Custom Firmware (CFW) version

At the time of the game's release, newer titles required higher firmware versions (like 4.30+) to run. Users on the then-standard 3.55 CFW used these "fixes" to bypass firmware checks without having to update their system software. Key Features of the Fix Firmware Compatibility:

Modifies the game's executable (EBOOT.BIN) to trick the system into thinking it meets the minimum firmware requirement. Region Specific: Specifically targets the version, which is the European retail release of the game. Manual Installation: Typically involves replacing the original file in the game’s folder via a file manager like Webman Mod Legacy Support: bles01834 tomb raider ps3 3-55 fix

Essential for users with specific hardware or older jailbreak setups that cannot safely update to modern CFW like Evilnat 4.91. How to Use It Tomb Raider - RPCS3 Wiki

region code refers to the European (PAL) version of Tomb Raider (2013)

for the PlayStation 3. The "3.55 fix" was a specific patch created by the homebrew community to allow this game—which originally required a higher system firmware (4.31+)—to run on older 3.55 Custom Firmware (CFW) Understanding the Fix

In the early days of PS3 jailbreaking, many users stayed on version 3.55 because it was the most stable gateway to homebrew. Since newer games like Tomb Raider (2013) came with encryption that required newer firmware keys, "fixes" were released that replaced the game's original files with modified versions compatible with the 3.55 keys. How to Apply the 3.55 Fix

To use this fix, you generally need to replace specific files within the game's directory on your PS3 internal or external hard drive: Locate the Game Folder : The game is usually stored in /dev_hdd0/GAMES/BLES01834/ Replace EBOOT.BIN : Copy the fixed PS3_GAME/USRDIR/ folder, overwriting the original file. Replace PARAM.SFO : Copy the fixed

folder. This file tells the system the minimum firmware requirement has been lowered to 3.55. Clear Game Data

: If you previously tried to launch the game and it failed, delete any existing "Game Data" (not save data) from the Game Data Utility on the XMB before restarting. Current Recommendations

While these fixes were common a decade ago, they are largely considered obsolete today. Most modern PS3 homebrew users are advised to: Update to Latest CFW : Installing a modern CFW, such as Evilnat 4.91

, removes the need for 3.55 fixes entirely. Newer firmware can natively run all games regardless of their original firmware requirements. Use ISO Format : Converting folder-based games to format and mounting them via webMAN MOD

often resolves compatibility issues without needing modified files. Avoid Modified Files on Newer FW

: If you have updated your firmware to 4.xx, using an old 3.55 fix can actually cause the game to black screen

or crash, as the modified keys may no longer be compatible with the newer system environment. Are you currently running 3.55 firmware , or are you looking to resolve a black screen issue on a newer version?

For users still running older 3.55 Custom Firmware (CFW) on their PlayStation 3, launching modern titles like the 2013 Tomb Raider reboot (Product Code BLES01834) requires specific modifications. This is because newer games are "keyed" for higher firmware versions, causing them to fail or black-screen on legacy 3.55 systems. Understanding the BLES01834 3.55 Fix

The "fix" for BLES01834 typically involves replacing the game's original EBOOT.BIN and sometimes its .self files with versions "resigned" for 3.55 compatibility.

Firmware Requirement: Your console must be on 3.55 CFW (like Kmeaw or Rogero).

Game ID: This specific fix is for the European (BLES01834) version of Tomb Raider (2013).

The Problem: Without this fix, the game will likely throw an error (such as 80010017) because the 3.55 system cannot decrypt the game's executable designed for 4.xx+ firmware. Step-by-Step Installation Guide

To apply the 3.55 fix, you generally need to manually swap out the internal game files using a file manager like multiMAN:

Backup the Game: Ensure you have the BLES01834 game folder on your internal or external HDD.

Locate USRDIR: Navigate to GAMES/BLES01834/PS3_GAME/USRDIR/ using a tool like multiMAN's File Manager.

Replace EBOOT.BIN: Download the specific BLES01834 3.55 Fix archive. Copy the included EBOOT.BIN into the USRDIR folder, overwriting the original file.

Tip: Always keep a backup of the original EBOOT.BIN just in case.

Set Permissions: In multiMAN, highlight the game and press Square for "Game Settings." Ensure BD Mirror and Internal/External are correctly selected based on where your game is stored.

Launch: Load the game from multiMAN and launch it from the XMB disc icon. Common Issues & Troubleshooting MEGATHREAD | Tomb Raider I-III Remastered - Bug List

Title: The Necessity of Preservation: Analyzing the BLES01834 Tomb Raider PS3 3.55 Fix

The landscape of video gaming is not merely defined by the play experience itself, but also by the technical ecosystem in which that experience exists. For the PlayStation 3 (PS3), this ecosystem was complex, involving a constant "cat and mouse" game between Sony’s firmware updates and the burgeoning homebrew community. Within this context, the "BLES01834 Tomb Raider PS3 3.55 fix" represents more than just a patch for a popular game; it serves as a case study in digital preservation, the intricacies of console security, and the enduring desire to maintain access to software in the face of obsolescence.

To understand the significance of the "3.55 fix," one must first understand the specific identifiers involved. "BLES01834" is the unique product code for the European release of the 2013 Tomb Raider reboot developed by Crystal Dynamics. This title was a landmark release, redefining the franchise with a gritty, survival-focused narrative. However, its release timing placed it in a precarious position regarding PS3 system firmware. By 2013, Sony had released firmware updates well beyond version 3.55, implementing new encryption keys and security protocols to combat piracy and homebrew exploitation. Consequently, official copies of the game required a system firmware higher than 3.55 to launch.

For a specific subset of the user base—those utilizing Custom Firmware (CFW) or hardware flashers to downgrade their consoles—this requirement was a barrier. Firmware version 3.55 is historically significant in the PS3 scene because it was the "golden firmware" where a critical security flaw was discovered, allowing for the installation of custom firmware. Many users chose to stay on, or downgrade to, this specific version to maintain control over their hardware. The "3.55 fix" for BLES01834 was a community-created modification designed to bypass the mandatory firmware check and decrypt the game’s executable files (EBOOT.BIN and sometimes .sprx files) to run on the older, vulnerable firmware.

The creation of such a fix required a high degree of technical skill. It involved extracting the game’s content, modifying the param.sfo file to change the required firmware version, and decrypting the executable files using the keys associated with firmware 3.55. In many cases, this also involved replacing specific encrypted modules with decrypted ones or patching the binary code to bypass security calls. This process highlights the ingenuity of the modding community. While often associated with piracy, these modifications historically overlap with the realm of digital preservation. As official servers shut down and official support wanes, the ability to modify software to run on open systems becomes vital for archivists and enthusiasts who wish to ensure that games like Tomb Raider remain playable long after official hardware support ceases.

However, the use of a 3.55 fix was not without its complications. Modifying game files often meant that users could not simply play the game "out of the box." They had to understand file structures, the use of tools like MultiMAN or webMAN, and the risks associated with modifying system files. Furthermore, this process existed in a legal grey area. While modifying software one owns for personal use is defended by some as fair use, the distribution of decrypted executables is often a violation of copyright law. Thus, the BLES01834 fix exists at the intersection of consumer rights, intellectual property law, and technical curiosity.

In conclusion, the "BLES01834 Tomb Raider PS3 3.55 fix" is a microcosm of the broader challenges inherent in the console lifecycle. It illustrates the friction between a manufacturer’s desire to secure their platform and a user’s desire to control their purchased hardware. As the PS3 ages and becomes a legacy system, these fixes transition from tools of circumvention to tools of preservation. They ensure that Lara Croft’s 2013 adventure remains accessible, serving as a testament to the technical prowess of the community that refused to let hardware limitations dictate their gaming experience.

The BLES01834 Tomb Raider PS3 3-55 Fix: A Comprehensive Guide

The PlayStation 3 (PS3) has been a beloved gaming console for many years, with a vast library of games that cater to different tastes and preferences. One of the most iconic game franchises on the PS3 is Tomb Raider, which has been a staple of the gaming industry for decades. However, some PS3 users have encountered issues with the BLES01834 version of Tomb Raider on their consoles, particularly those running firmware 3.55 or lower. In this article, we'll explore the BLES01834 Tomb Raider PS3 3-55 fix and provide a comprehensive guide on how to resolve the issue.

What is the BLES01834 Tomb Raider PS3 3-55 issue?

The BLES01834 version of Tomb Raider is a specific release of the game that was patched to fix certain issues and improve performance. However, some PS3 users with firmware 3.55 or lower have reported encountering problems when trying to play the game. The issue is usually accompanied by an error message, such as "Cannot start the game. The game disc is not compatible with your PS3 system." or "An error occurred during the start-up process."

Causes of the BLES01834 Tomb Raider PS3 3-55 issue

The BLES01834 Tomb Raider PS3 3-55 issue is caused by a combination of factors, including:

The BLES01834 Tomb Raider PS3 3-55 fix

Fortunately, there are several methods to resolve the BLES01834 Tomb Raider PS3 3-55 issue. Here are some possible solutions:

Method 1: Update your PS3 firmware

The most straightforward solution is to update your PS3 firmware to 3.60 or higher. This will ensure that your console is compatible with the BLES01834 version of Tomb Raider. To update your firmware:

Method 2: Use a patch to bypass firmware checks

Some developers have created patches that can bypass the firmware checks, allowing you to play the BLES01834 version of Tomb Raider on firmware 3.55 or lower. However, please note that using such patches may void your warranty and may be against the terms of service.

Method 3: Swap discs or use a backup

If you have access to a PS3 with a higher firmware level, you can try swapping discs or using a backup of the game to play it on your console. However, this method is not recommended, as it may be against the terms of service and may not work due to copy protection.

Method 4: Reinstall the game and patches

Sometimes, a simple reinstallation of the game and patches can resolve the issue.

Method 5: Check for hardware issues

In rare cases, the issue may be caused by a hardware problem with your PS3 or the game disc. Try:

Conclusion

The BLES01834 Tomb Raider PS3 3-55 fix is a common issue that can be resolved using one of the methods outlined above. While updating your PS3 firmware is the most straightforward solution, other methods may work for those who are unable or unwilling to update their firmware. It's essential to note that some methods may void your warranty or be against the terms of service. If you're experiencing issues with the BLES01834 version of Tomb Raider on your PS3, try one of the methods outlined above to get back to exploring the world of Lara Croft.

Frequently Asked Questions

Disclaimer

The information provided in this article is for educational purposes only. The author and publisher are not responsible for any damage or loss caused by the use of the methods outlined in this article. Always follow the terms of service and warranty agreements when attempting to fix issues with your PS3 or games. Note: This guide reflects PS3 homebrew practices from

The BLES01834 region code refers to the European version of the 2013 Tomb Raider

reboot on PlayStation 3. For users running older Custom Firmware (CFW) such as 3.55, applying a "3.55 fix" is a common procedure to bypass the higher system firmware requirements (4.40+) that the game originally demanded.  Understanding the 3.55 Fix 

When the 2013 Tomb Raider was released, it required a firmware version higher than the then-standard 3.55 jailbreak. To play this game on older CFW without updating the entire system, developers created "fixes" that modify the game's executable files. 

Modified EBOOT.BIN: The core of the fix is a modified version of the game’s main executable. It is patched to tell the PS3 that the game is compatible with firmware 3.55.

SFO Editing: The PARAM.SFO file is often updated alongside the EBOOT to lower the required system version attribute.  How to Apply the Fix 

If you have the BLES01834 game files and a 3.55 fix package, the general installation process follows these steps: 

Backup Original Files: Before making changes, copy your original EBOOT.BIN and PARAM.SFO from the PS3_GAME/USRDIR/ folder to a safe location.

Replace Files: Move the patched EBOOT.BIN and PARAM.SFO files into the USRDIR folder of your game directory, overwriting the originals.

USB Installation (if PKG): If the fix is provided as a .pkg file, place it on a FAT32 formatted USB drive. Plug it into the right-most port of your PS3 and use the "Install Package Files" option on the XMB.

License Activation: If the game is in a digital format, ensure the corresponding .rap license file is placed in the exdata folder on your PS3 internal HDD or the root of your USB drive.  Troubleshooting Common Issues 

Black Screen on Boot: This often happens if the EBOOT wasn't signed correctly for 3.55. Ensure you are using a fix specifically designed for the BLES01834 version, as fixes for the American (BLUS) version may cause crashes.

Games Not Showing Up: Ensure your game folder is named simply (e.g., "Tomb Raider") and located in the GAMES or GAMEZ folder of your internal or external hard drive.

Firmware Updates: While staying on 3.55 was popular, modern CFW like Evilnat 4.91 can run these games natively without needing individual fixes. 

Are you planning to manually patch the files yourself, or are you looking for a pre-made PKG fix? 

The BLES01834 code identifies the European retail version of the 2013 Tomb Raider

reboot for PlayStation 3. During the peak of the PS3 homebrew scene, "3.55 fixes" were critical for users on legacy Custom Firmware (CFW) to run games that originally required a higher system version. The Purpose of the 3.55 Fix

When Tomb Raider was released in March 2013, it required PS3 firmware version 4.31 or higher to boot. Users who stayed on Firmware 3.55—the "golden" version for jailbreaking at the time—could not run the game's executable (EBOOT.BIN) because it was encrypted with newer keys. A "3.55 fix" typically consists of:

Patched EBOOT.BIN: The game's main executable, decrypted and re-signed with 3.55 keys.

Modified SFO: The PARAM.SFO file, edited to lower the required system version from 4.31 to 3.55.

Replacement Scripts: Occasional fixes for .sprx files or other library assets to ensure compatibility with older firmware. Essential Installation Steps

To apply a fix for BLES01834, the general workflow used by the community was as follows:

Backup: Transfer the game files to the PS3 internal or external hard drive (usually in GAMES/BLES01834).

Locate Fix Files: Obtain the specific BLES01834 3.55 fix (often distributed as a .rar or .zip).

Overwrite: Use a file manager like multiman or an FTP client to replace the original EBOOT.BIN and PARAM.SFO in the game's USRDIR folder with the patched versions. Boot: Launch the game via your backup manager. Modern Context: Is it still needed?

Today, most users have migrated to modern custom firmwares like Evilnat 4.91 or HFW (Hybrid Firmware) with PS3HEN. These modern versions can natively decrypt and run games requiring higher firmwares without the need for manual 3.55 fixes.

If you are experiencing technical difficulties beyond firmware compatibility, such as crashes or corrupted data, you can use the PS3's built-in Recovery Mode to rebuild the database: How To Fix PlayStation 3 Slim Corrupted Firmware 2025! Robles Junior YouTube• May 1, 2025

Pro-Tip: If you are still on 3.55, it is generally recommended to update to a modern CFW using a Standard Update via USB. This eliminates the need for individual "fixes" for every game released after 2011.

Are you looking to update your firmware to a newer version, or do you specifically need help troubleshooting a crash on your current setup? Tomb Raider 2013 Let's Play (PS3)

, for the PlayStation 3. A "3.55 fix" is a specific software patch (typically a modified EBOOT.BIN file) used to allow games designed for newer firmware (4.xx+) to run on older 3.55 Custom Firmware (CFW).

While the "3.55 fix" was highly sought after during the early days of the PS3 modding scene (circa 2013), it is largely considered obsolete today due to the availability of newer firmwares. Why 3.55 Fixes Were Used

Firmware Gaps: In 2013, many users remained on 3.55 CFW because it was the most stable and easily hackable version.

Encryption: Newer games like Tomb Raider (BLES01834) were encrypted for 4.21+ firmware, causing them to fail or black-screen on older setups.

The Fix: Modders would resign the game's executable (EBOOT.BIN) to a lower encryption key compatible with 3.55, allowing it to boot on older consoles. Modern Solutions

If you are currently trying to run Tomb Raider on a modded PS3, it is highly recommended to use current tools rather than hunting for old fixes:

Update to Latest CFW/HEN: Modern custom firmware like Evilnat 4.9x or PS3HEN automatically handles game encryption, making separate 3.55 fixes unnecessary.

Backup Managers: Use modern managers like webMAN MOD or IRISMAN to launch games. These tools often include "auto-fix" features that patch games for your specific firmware version on the fly.

System Integrity: If you encounter errors like "8002f1f9" or "8002f994" during updates or game launches, these are often related to hardware failures (like a bad Wi-Fi/Bluetooth module or HDD) rather than the game file itself.

Are you currently encountering a black screen or a specific error code when trying to launch the game?

PS3 won't work after trying to update to 4.91 - PlayStation 3 Slim - iFixit

The BLES01834 region code specifically identifies the European version of the 2013 Tomb Raider reboot for the PlayStation 3. For users running older 3.55 Custom Firmware (CFW), a specific "fix" is often required to bypass the game's original requirement for a higher system firmware. Understanding the BLES01834 3.55 Fix

When Tomb Raider was released in 2013, the PS3 was already several firmware versions past the "golden" 3.55 jailbreak era. To allow the game to run on these older, modified systems, developers released modified files—typically a patched EBOOT.BIN—that trick the console into booting the game without demanding a system update. Key Components of the Fix

Modified EBOOT.BIN: The primary file responsible for launching the game. The "3.55 fix" replaces the original encrypted file with one decrypted and resigned specifically for older firmware.

Param.sfo Edits: Often, the internal metadata of the game must be edited to lower the "System Software" requirement from the default (typically 4.30+) down to 3.55.

PKG Patches: Many versions of this fix are distributed as a .pkg file that can be installed directly through the "Install Package Files" menu on the PS3 XMB. Installation Guide

Backup Your Game: Ensure you have the full Tomb Raider (BLES01834) game folder on your internal or external hard drive.

Locate the Files: Download the 3.55 fix specific to the BLES01834 ID. This usually includes a new EBOOT.BIN and sometimes a PARAM.SFO file. Replace Original Files:

Navigate to the game directory: GAMES/Tomb Raider [BLES01834]/PS3_GAME/USRDIR/. Delete or rename the original EBOOT.BIN. Copy the fixed EBOOT.BIN into this folder.

Clear Game Data: If you have previously tried to launch the game, go to the Game Data Utility on your PS3 and delete any Tomb Raider data to ensure the new files are used.

Boot via multiMAN: Launch the game through a backup manager like multiMAN or Irisman. Modern Alternative: Updating Your Firmware

The BLES01834 identifier refers to the European retail version of the 2013 Tomb Raider reboot

on PlayStation 3. A "3.55 fix" is a community-created modification designed to backport games that require newer firmware (like 4.21+) to run on older Custom Firmware (CFW) versions, specifically the landmark 3.55 CFW.

Feature Overview: Tomb Raider (BLES01834) 3.55 Compatibility Fix

This fix allows users running older jailbroken systems to experience Lara Croft's origin story without needing to update their system software.

Primary Purpose: Modifies the game’s core executable (EBOOT.BIN) and configuration file (PARAM.SFO) to bypass firmware checks that would otherwise prevent the game from booting on 3.55 CFW. Requirements:

Target Version: Specifically compatible with the BLES01834 European region disc or digital backup. Key Components:

Modified EBOOT.BIN: The game's main launcher, patched to remove "Minimum Version" requirements.

Modified PARAM.SFO: Updated to reflect a lower system requirement (set to 3.55 instead of the retail 4.30+). Installation Basics

While specific files vary by provider, the general process for applying this fix to a game backup includes:

Backup: Navigating to the game's installation folder on an external or internal drive.

Replacement: Swapping the original PARAM.SFO in the PS3_GAME folder and the EBOOT.BIN in the USRDIR folder with the patched versions.

Launch Settings: Enabling BD Mirror mode in managers like multiMAN if the game fails to load from the XMB. Compatibility Note

If you are running a modern Custom Firmware (such as Ferrox, Rebug, or Evilnat) version 4.21 or higher, this fix is not required. Modern CFWs automatically handle the decryption and execution of games requiring higher firmware. If you'd like, I can help you:

Find instructions for modern CFW updates (like 4.91) so you don't need fixes.

Troubleshoot black screen issues when launching PS3 backups. Identify the Title ID for other regions of Tomb Raider.

For the Tomb Raider (2013) PS3 version with the ID , the "3.55 fix" refers to a custom patch required to run the game on older 3.55 Custom Firmware (CFW). Modern PS3 versions or consoles with CFW 4.21 and higher do not need this fix. Applying the 3.55 Fix To manually apply the fix for your jailbroken PS3:

Locate the Fix Files: You typically need a modified EBOOT.BIN and PARAM.SFO file specifically designed for version 3.55. Replace Game Files:

Navigate to the game directory on your PS3 (often in dev_hdd0/GAMES/BLES01834/). Copy the fixed PARAM.SFO into the PS3_GAME folder. Copy the fixed EBOOT.BIN into the USRDIR folder.

Launch Settings: If the game still fails to boot, use a manager like multiMAN and enable BD Mirror in the game settings. Helpful Troubleshooting Tips

Update Compatibility: If you have installed game updates (e.g., version 1.01), you must use a fix compatible with that specific update version, or the game may crash.

Save File Issues: Some users report crashes that can be bypassed by starting a new game on Save File #2 instead of the first slot.

Self-Patching: If you cannot find a pre-made fix, tools like Simple EBOOT Resigner can sometimes "resign" the original executable to work on 3.55 firmware.

Are you currently on 3.55 firmware, or are you running a more recent CFW like 4.80+? [RELEASE] Simple EBOOT Resigner (3.55) - Facebook

Here’s why I can’t produce that content:

If you’re looking for legitimate support for Tomb Raider on PS3, I can suggest:

If you meant something else — such as a bug fix for a different platform or an official patch — please clarify, and I’ll be happy to help within appropriate boundaries.

. A "3.55 fix" is a patch designed for older PS3 consoles running Custom Firmware (CFW) 3.55

. This version of firmware is historic in the modding community because it was the last official firmware (OFW) that could be easily jailbroken without hardware modifications.

Because Tomb Raider (2013) requires a higher system firmware (typically 4.31+) to run, users on 3.55 firmware must use a "fix" to bypass the system check. Common Fix Methods

If you are trying to run the BLES01834 version on a modded console, you usually need to replace specific game files: EBOOT.BIN and .SPRX Fixes

: These are the most common fix files. You replace the original located in the game's

folder with a patched version that has had its firmware requirements lowered to 3.55. Multiman / Webman Settings : Modern loaders like webMAN MOD

can often auto-patch games on the fly, making manual file replacement unnecessary. Update Compatibility

: Sometimes, installing an official game update will overwrite your fix. If you update the game through the XMB, you must ensure you have a corresponding 3.55 fix for that specific update version (e.g., Update 1.01). Troubleshooting Black Screen

: If the game launches to a black screen, ensure "BD Mirror" is enabled in your backup manager settings. Firmware Mismatch

: If you receive an "error occurred during the start operation" (80010017), the

is likely still encrypted for a higher firmware or the fix file is corrupted. Recommended Upgrade

: It is generally recommended to update from 3.55 to a more modern CFW, such as Evilnat 4.91

Last Updated: October 2025
Archive Status: Verified working with Rebug 3.55.3 and Multiman 04.85.01.

The "BLES01834 Tomb Raider PS3 3.55 fix" refers to a specific compatibility patch for the European retail version (BLES01834) of Tomb Raider

(2013). This fix allows the game to run on older PlayStation 3 consoles running Custom Firmware (CFW) version 3.55, which was a major milestone in the PS3 jailbreaking community. What is the 3.55 Fix?

When Tomb Raider was released, it required a higher system firmware than 3.55 to run. To bypass this, the community developed "fixes" that modified the game's executable files (EBOOT.BIN and .sprx files) to trick the console into thinking it met the system requirements.

BLES01834: The region-specific ID for the European (PAL) version of Tomb Raider.

3.55 CFW: The target firmware version. Many early jailbroken consoles stayed on 3.55 because it was considered the most stable "golden" firmware for running backups and homebrew. How to Apply the Fix

If you are still using legacy 3.55 firmware, the general process for applying this fix involves replacing specific game files:

Backup Your Game: Ensure you have the original game files from your BLES01834 disc on your PS3 internal or external hard drive.

Download the Fix: Locate the specific "3.55 fix" package for BLES01834 from a reputable community source.

Replace EBOOT.BIN: Use a file manager like multiMAN to navigate to the game's directory: GAMES/BLES01834/PS3_GAME/USRDIR/.

Overwrite Files: Replace the original EBOOT.BIN (and any associated .sprx files) with the modified versions from the fix folder.

Set Permissions: Some older CFW versions require you to "Fix Permissions" within your backup manager to ensure the new files can execute properly. Troubleshooting Common Issues

Black Screen on Launch: This often happens if you use a fix for the wrong region (e.g., using a BLUS fix for a BLES game).

Version Mismatch: Ensure the fix matches the game's update version (e.g., a fix for v1.00 may not work if you have installed official game updates).

Alternative Recommendation: If your console supports it, modern community members suggest updating to a newer CFW like Evilnat 4.92. Newer firmwares have "Cobra" features that automatically handle these compatibility issues without needing manual file replacements.

Are you looking to update your console to a newer firmware or specifically stay on 3.55 for a particular reason? Update CFW Directly on a Jailbroken PS3 with Evilnat CFW!

When Tomb Raider was released in March 2013, it shipped on Blu-ray discs containing an update file (often located in PS3_UPDATE/PS3UPDAT.PUP) that required Firmware 4.41 or higher.

For users running Custom Firmware 3.55 (the most stable CFW at the time), this created a roadblock:

Users refused to update because it would patch the jailbreak vulnerabilities.

In PlayStation 3 terminology, BLES01834 is the Product Code (Title ID) for the European/Asian (PAL) retail version of Tomb Raider (the Crystal Dynamics reboot). Every PS3 game has a unique code: