top of page

Bysoft Cam Tutorial May 2026

Tired of witness marks on your finished edge? Configure this:

In this BySoft CAM tutorial, always use No Lead on micro-joints to prevent the part from moving. bysoft cam tutorial

  • Problem: Scrap skeleton is unstable.
  • Troubleshooting Common Issues
  • Resources for Advanced Learning

    • BySoft is modular. For CAM, you will use: Tired of witness marks on your finished edge

    | Module | Function | |--------|----------| | BySoft 7 / BySoft CAM | Core programming environment | | BySoft Nesting | Automatic and interactive part layout | | BySoft CAD | Geometry repair and feature extraction | | BySoft Tool Library | Punch tool management (for punch/punch-laser) | | BySoft Machine Config | Post-processor and machine limits | In this BySoft CAM tutorial, always use No

    Once simulation is clean:

    Pro tip: BySoft CAM automatically suggests feed rates and laser power based on Bystronic’s internal Cutting Parameter Database (derived from years of real machine testing). Do not override unless you have validated data.

    | Problem | Likely Cause | Solution | | :--- | :--- | :--- | | "Contour not closed" | Gap or overlapping line in DXF. | Use Edit > Close gaps or redraw the endpoint. | | Part tips up during cut | No microjoints. | Add 2-3 microjoints on the last 10mm of cut. | | Piercing too close to edge | Incorrect approach point. | Drag the start point arrow to a safer location. | | Gas pressure wrong | Wrong technology entry. | Verify material/thickness in the Technology DB. |

    bottom of page