Here is the mistake that ruins printers: Resetting the counter without physically replacing or cleaning the waste ink pads.
The V3200 software only resets the digital memory. It does not remove the actual wet ink from the sponge. If you reset the counter to zero but the pad is physically full, the next cleaning cycle will cause ink to overflow inside the printer. This ink can:
How to do it correctly:
Step 1: Enter Service Mode This is the trickiest part. The printer cannot be in normal mode.
Step 2: Launch the Tool
Step 3: Connect to Printer
Step 4: Read EEPROM Information
Step 5: Reset Waste Ink Counter
Step 6: Verify
Step 7: Power Cycle
V3200 is a version number in a lineage of Canon service utilities (preceded by V2000, V3000, etc.). It is a lightweight, Windows-based executable (typically around 300-500 KB) that communicates directly with the printer’s EEPROM (Electrically Erasable Programmable Read-Only Memory) via USB. canon service tool v3200
If you want, I can:
Related search suggestions have been prepared.
Canon Service Tool v3200 – Reset Waste Ink Counter for Pixma MG/TS Series
Download the official technician-level utility to diagnose and reset Canon printers.
Features:
Requirements: Windows 7/8/10/11 (32 & 64-bit), USB cable, Administrator rights.
⚠️ Warning: For experienced users only. Resetting the waste counter without physical maintenance will cause ink overflow and permanent printer damage.
File Info: Size: ~1.2 MB | Version: 3.2.0 | Release Date: 2021
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | "Unable to communicate" | Printer not in Service Mode | Repeat the power-button sequence exactly. Disable WiFi on printer. | | "Timeout error" | USB driver conflict | Reinstall Canon printer driver. Use a different USB port. | | "Absorber counter not found" | Wrong tool version for your printer | Your printer requires V3400 or newer. Stop immediately. | | Reset works, but error returns after 1 page | Failed to reset both main AND platen | Re-enter service mode and ensure both checkboxes are ticked. | | Tool crashes on launch | Missing MSVC++ runtime | Install Visual C++ Redistributable 2015-2022 (x86 and x64). |