Caraflo V200 Shower Instructions -
Note: This should be done only if boiler hot water output is above 55°C.
“Shower runs cold when toilet flushed” → Thermostat should compensate; if not, clean filters or replace cartridge.
“Diverter stuck” → Remove handle and lubricate O-rings with silicone grease.
“Temperature handle stiff” → Limescale inside – remove cartridge, clean, apply silicone grease.
Would you like a printable one-page quick-start guide or step-by-step illustrated instructions for the Caraflo V200 next?
The Caraflo V200 is a thermostatic shower mixer valve widely used in static caravans and holiday homes across the UK. Introduced in 2013 as a replacement for the V100 model, it is a standard fixture in brands like Swift, Willerby, and ABI. Core Features
Dual Orientation: This valve can be installed either horizontally or vertically, allowing for flexible placement in various shower pod designs.
Thermostatic Control: Maintains a consistent water temperature by automatically adjusting for fluctuations in the incoming water supply.
Direct Replacement: Features 45mm fixing centers, making it a drop-in replacement for older V100 models without needing modifications to the pipework.
Industry Certified: Fully compliant with NCC certification, WRAS approval, and TMV2 scheme standards for safety and performance. caraflo v200 shower instructions
Durable Build: Typically manufactured from solid brass with a polished chrome finish and a ceramic disc cartridge for longevity. Operating Instructions
Operating the V200 is straightforward, involving two primary controls usually located on the valve handles:
Flow Control: Turn the designated handle (often the right or bottom handle, depending on orientation) toward you to increase water flow and away from you to turn it off.
Temperature Control: Rotate the temperature handle (often the left or top handle) to adjust the warmth.
Safety Stop: The valve is typically factory-set to a maximum safety temperature of around 38°C. To increase the temperature beyond this limit, you must press the safety override button while turning the handle.
Watch this brief guide on how a thermostatic mixer works to maintain consistent temperatures:
How a Thermostatic Mixing Valve Works (And Why You Need One) Morgan Inspection Services YouTube• Jul 15, 2025 Maintenance & Winter Care
Because this valve is intended for holiday homes, it is designed for easy disconnection.
Drain-Down: To prevent damage from freezing during the winter, you must use the supplied drain-down key to empty the water from the internal thermostatic valve. Adjust flow divergence via handset and any showerhead
Anti-Limescale: Standard cleaning with mild soap and water is recommended; avoid harsh chemicals that might damage the chrome finish. Technical Specifications Caraflo V200 Shower Mixer Tap Thermostatic Chrome
Caraflo V200 is a thermostatic mixer shower valve specifically designed for leisure vehicles like static caravans, motorhomes, and holiday homes. It is an upgrade to the older V100 model, sharing the same 45mm pipe centres for a direct replacement without needing modification. The Caravan Warehouse Key Installation & Site Requirements For safe and optimal performance, the requires specific water conditions National Shower Spares Temperature Limits: Recommended maximum of 65 raised to the composed with power C , with a minimum hot water inlet of 55 raised to the composed with power C and a maximum cold inlet of 25 raised to the composed with power C Anti-Scald Protection: The mixed water temperature is typically preset between 35 raised to the composed with power C 40 raised to the composed with power C Fail-Safe Feature:
If either the hot or cold supply fails, the valve is designed to stop or significantly reduce the flow to prevent scalding or thermal shock. Supply Compatibility:
Do not mix a gravity-fed hot supply with a mains-fed cold supply (or vice versa). National Shower Spares Operating & Maintenance Instructions Water Control:
The valve uses a single handle or dial system to blend water. It maintains a consistent temperature even if water is used elsewhere in the vehicle (e.g., flushing a toilet). Winterizing (Critical): Because these are used in seasonal homes, the is designed for easy disconnection to prevent frost damage Turn off the main water supply to the caravan/motorhome.
Open all taps and the shower valve to drain remaining water.
Consider applying a non-toxic, caravan-safe antifreeze into the valve body to protect internal components. Cartridge Replacement:
If the shower drips or fails to regulate temperature, the internal thermostatic cartridge
(92mm length, 31.45mm diameter) may need replacement or descaling. Use silicone grease Note: This should be done only if boiler
when reinstalling or servicing the cartridge to ensure smooth operation. The Caravan Warehouse Replacement Spare Parts Caraflo V200 Shower Mixer Tap Thermostatic Chrome
Screw the Caraflo V200’s connecting nut onto the shower arm by hand. Turn clockwise until it stops. Do not use a wrench yet.
The CaraFlo V200 is equipped with a thermostatic mixing valve designed to prevent scalding.
The Caraflo V200 is a thermostatic shower mixer for caravans/holiday homes (45 mm centres). It maintains set temperature and includes a drain-down feature for winterising.
Wall preparation:
Plumbing connections:
Flushing:
To maintain the appearance and function of the Caraflo V200: