Dante Virtual Soundcard Dvs Verified -

If your Dante Virtual Soundcard is showing as "Not Verified" or simply not passing audio, the culprit is usually one of the following:

| Feature | Specification / Details | |---------|------------------------| | Max Channels | 64 x 64 (bi-directional) at 48 kHz | | Supported Sample Rates | 44.1, 48, 88.2, 96 kHz (channel count reduces at 96 kHz: 32x32) | | Bit Depth | 24-bit (standard Dante), 32-bit float (depending on app and driver) | | Latency | 4, 6, 8, 10, 20, 50 ms (software-selectable; not hardware-level like Dante Brooklyn) | | Audio Transport | Redundant (primary/secondary) or switched (single network) | | Clock Sync | PTPv1 (IEEE 1588-2008) – Dante’s proprietary precision time protocol | dante virtual soundcard dvs verified

| Feature | Available in DVS? | |---------|------------------| | Dante Redundancy (Primary + Secondary Ethernet) | ✅ Yes (requires two separate NICs) | | AES67 (Ravenna/ST 2110) | ❌ No (Dante VS does not support AES67; hardware Dante does) | | Dante Domain Manager (DDM) | ✅ Yes (licensed separately) | | Device Locking (secure enrollment) | ✅ Yes (requires DDM) | | Multicast (group audio streams) | ✅ Yes (via Dante Controller) | | Unicast (point-to-point) | ✅ Yes (default) | If your Dante Virtual Soundcard is showing as

To achieve a "Verified" status for DVS, the network infrastructure must meet specific criteria: DVS "verifies" that the selected network interface is

Date: October 26, 2023 Subject: Analysis of the "Verified" Status for Dante Virtual Soundcard Prepared For: Audio Engineering & IT Departments

DVS "verifies" that the selected network interface is actually capable of Dante traffic. If you accidentally bind DVS to your Wi-Fi adapter or a virtual machine adapter (VMware, VirtualBox), verification will fail because those interfaces cannot handle PTP (Precision Time Protocol).

If you have done the above and still see "Not Verified," here is the advanced troubleshooting sequence: