Din En 13155 Pdf May 2026

A revision process is expected around 2026–2027 to align with the new Machinery Regulation (EU) 2023/1230, which replaces the old Machinery Directive. Key anticipated changes include:

Staying current with these updates means always having access to the latest DIN EN 13155 PDF from official sources.

If you're looking to access the PDF, I recommend checking these official sources for the most accurate and up-to-date information.

DIN EN 13155 is the harmonized European safety standard for non-fixed load lifting attachments used with cranes, hoists, and manually controlled load-manipulating devices. It ensures these attachments meet essential health and safety requirements of the EU Machinery Directive. Key Specifications of the Standard

Current Version: The most recent major revision is EN 13155:2020 (adopted in Germany as DIN EN 13155:2022-03), which supersedes the 2003+A2:2009 version. Covered Attachments: Clamps: Plate clamps and general clamps.

Lifting Magnets: Electric, permanent, and electro-permanent models.

Vacuum Lifters: Self-priming and non-self-priming (pump, venturi, turbine).

Structural Attachments: Lifting beams (spreader beams), C-hooks, and lifting forks.

Concrete Handling: Lifting insert systems for normal-weight concrete. Major Safety & Verification Requirements

Mechanical Strength: Attachments must withstand a static test of 2 × WLL (Working Load Limit) without permanent deformation and 3 × WLL without releasing the load.

Verification Methods: Strength can be verified through either calculation (following Annex A) or physical testing.

Friction Factor: For devices relying on friction (like certain clamps), a safety factor of at least 2 is required to prevent load slippage.

Marking & Documentation: Manufacturers must provide detailed instruction manuals, EC Declarations of Conformity, and specific markings for each device. Cranes — Safety — Non-fixed load lifting attachments

The standard DIN EN 13155:2020+A1:2025 (often referred to as BS EN 13155 or simply EN 13155) is the primary European safety standard for non-fixed load lifting attachments, covering equipment like plate clamps, vacuum lifters, magnets, C-hooks, and lifting beams. It is a harmonized standard under the EU Machinery Directive 2006/42/EC, designed to ensure safety in lifting operations. Key Aspects of the Standard

Scope: Applies to attachments that are not permanently fixed to the crane or hoist, such as lifting beams, clamps, and magnets, used in overhead traveling cranes and lifting devices.

Safety Requirements: Defines mandatory safety measures, including structural integrity, deformation limits, and stability during lifting.

Verification Methods (A1:2025 Update): The 2025 amendment clarifies verification methods, allowing either calculation or testing (2x WLL for elastic, 3x WLL for yield) to ensure safety, incorporating a variable sliding scale for load testing.

Specific Device Standards: Provides specific requirements for individual types of lifting gear, such as vacuum lifters (self-priming or powered) and magnets.

Documentation: Requires clear marking (safe working load - SWL) and comprehensive instruction handbooks for operators. Why It's Critical (Solid Review)

Compliance: Compliance with this standard allows manufacturers to prove their equipment meets the essential health and safety requirements of the EU Machinery Directive, ensuring lawful operation.

Safety-Focused: It aims to mitigate risks from common failures (e.g., dropped loads) by requiring rigorous testing of welds, structural components, and safety features.

Versatility: Covering a broad range of attachment types, it provides a unified safety approach across different lifting equipment manufacturers and types.

Up-to-Date: The updated 2025 amendment addresses previous inconsistencies in testing and calculation, making it the most reliable guide for design and safety verification. Where to Find the Document

You can find the standard (often as a PDF) on various technical standard websites: ANSI Webstore iTeh Standards Scribd (Search for BS EN 13155:2020) If you are looking for specific guidance, I can help with: Comparing the 2003 and 2020/2025 versions

Explaining testing methods for specific attachments (e.g., C-Hooks, Magnets) Finding the requirements for lifting insert systems Let me know what you need to dive into. Cranes — Safety — Non-fixed load lifting attachments

DIN EN 13155 standard, titled "Cranes – Safety – Non-fixed load lifting attachments,"

is the German implementation of the European harmonized standard for equipment that connects a load to a crane but is not a permanent part of either. NormSplash The current version is DIN EN 13155:2022-03

(based on EN 13155:2020), which superseded the 2003+A2:2009 edition. A further update, EN 13155:2020+A1:2025

, has been approved and is being integrated into national versions. Accuris Standards Store Scope and Covered Equipment din en 13155 pdf

The standard specifies safety requirements for the design, testing, and maintenance of various detachable lifting tools, including: Beams and Hooks : Lifting beams (spreaders), C-hooks, and lifting forks. Clamping Devices : Plate clamps and other mechanical clamps. Suction and Magnetic Tools

: Vacuum lifters (self-priming and non-self-priming) and various lifting magnets (battery, mains, or permanent). Concrete Systems

: Lifting insert systems for prefabricated concrete products (added in the 2020 update). iTeh Standards Key Safety Requirements Load Testing

: Attachments intended for up to 16,000 duty cycles must hold 2x their nominal load without permanent deformation and must not drop 3x their nominal load even if they undergo permanent deformation. Fatigue Strength

: For equipment used for more than 16,000 cycles, specific fatigue strength proof is required, aligning with the EN 13001 series Verification Methods

: The 2020/2025 updates introduce clearer distinctions between verification by calculation and test versus verification by Safety Factors

: For specific applications like concrete lifting inserts, safety factors range from 2.3 to 2.5 depending on factory production controls. www.zt-grassberger.at Exclusions The standard does iTeh Standards Slings, ladles, buckets, or grabs. Lifting of persons or operation in explosive atmospheres.

Direct contact with foodstuffs or pharmaceuticals requiring high hygiene levels.

Specific hazardous materials like molten metal or radioactive substances. Purchasing Information

You can acquire the full PDF or paper versions from authorized distributors: : Offers the DIN EN 13155:2025-11

for approximately €229.30 (German) or €367.20 (English translation). Accuris Standards Store : Lists the DIN EN 13155:2022 for around $208. BSI Knowledge : Provides the equivalent BS EN 13155:2020 for the UK market. specific checklist

Understanding DIN EN 13155: The European Standard for Lifting Equipment

As a professional in the lifting equipment industry, it's essential to stay up-to-date on the latest standards and regulations. One crucial standard is DIN EN 13155, which outlines the requirements for the design, manufacture, and testing of lifting equipment. In this blog post, we'll dive into the details of DIN EN 13155 and explore its significance in ensuring the safety and reliability of lifting equipment.

What is DIN EN 13155?

DIN EN 13155 is a European standard that specifies the requirements for lifting equipment, including cranes, hoists, and winches. The standard covers various aspects, such as design, construction, testing, and inspection, to ensure that lifting equipment is safe and reliable. The standard is widely adopted across Europe and is recognized as a benchmark for lifting equipment manufacturers.

Key Aspects of DIN EN 13155

The standard covers several critical aspects of lifting equipment, including:

Benefits of DIN EN 13155 Compliance

Complying with DIN EN 13155 offers numerous benefits for lifting equipment manufacturers, users, and owners. Some of the key benefits include:

Obtaining a PDF Copy of DIN EN 13155

If you're interested in obtaining a PDF copy of DIN EN 13155, there are several options:

Conclusion

DIN EN 13155 is a critical standard for lifting equipment manufacturers, users, and owners. By understanding the requirements of the standard, manufacturers can ensure that their lifting equipment is safe, reliable, and compliant with regulations. Whether you're a manufacturer, user, or owner of lifting equipment, it's essential to stay informed about DIN EN 13155 and its significance in ensuring the safety and reliability of lifting equipment.

The DIN EN 13155 standard is the German implementation of the European standard for the safety of non-fixed load lifting attachments used with cranes, hoists, and manually controlled load manipulating devices. The latest major version is DIN EN 13155:2020, which includes critical updates for vacuum lifters, lifting magnets, and structural calculations. Scope of DIN EN 13155

The standard specifies safety requirements for attachments that can be fitted to and removed from a crane by the user. It covers the following specific equipment:

Mechanical Clamps: Plate clamps, lifting forks, and C-hooks.

Vacuum Lifters: Both self-priming and non-self-priming (pump, venturi, or turbine) systems.

Lifting Magnets: Electric (battery or mains-fed), permanent, and electro-permanent magnets. Structural Attachments: Lifting beams and spreaders. A revision process is expected around 2026–2027 to

Concrete Inserts: Lifting insert systems for use in normal-weight concrete. Key Safety Requirements & Verification

To ensure mechanical integrity, the standard mandates rigorous testing and calculation protocols:

SIST EN 13155:2021+A1:2025 - Crane Safety for Non-Fixed Load

A comprehensive guide for DIN EN 13155 (Cranes – Safety – Non-fixed load lifting attachments) should center on the core mechanical safety requirements, verification methods, and documentation necessary for compliance with European safety standards. 1. Scope and Applications

The standard covers detachable lifting equipment that can be fitted to a crane hook without affecting the crane's integrity.

Included Equipment: Plate clamps, vacuum lifters, lifting magnets (electric, permanent, electro-permanent), lifting beams, C-hooks, lifting forks, and lifting insert systems.

Key Exclusions: Slings, buckets, ladles, grab buckets, and attachments for lifting people.

Related Standards: For high-risk applications or fatigue design over 16,000 cycles, refer to EN 13001-2. 2. Mechanical Safety Requirements

The primary goal is ensuring structural integrity under load. Static Strength (≤ 16,000 cycles):

Elastic Condition: Must withstand 2 × Working Load Limit (WLL) without permanent deformation.

Ultimate Condition: Must withstand 3 × WLL without dropping the load, even if permanent deformation occurs.

Fatigue Strength (> 16,000 cycles): Requires detailed fatigue proofing as per EN 13001 series.

Safety Factors for Inserts: Specific factors apply to concrete lifting systems, such as for steel failure and for concrete failure. 3. Verification Methods

Compliance must be verified through either calculation or physical testing. EN 13155-A1 User's Guide Overview | PDF - Scribd

As of 2026, you cannot legally download this standard for free from generic document-sharing sites. However, you can access it through the following official channels:

Tip: If you only need to consult a single clause (e.g., safety factors for beam calculation), check if your local technical university library or standard association offers a reading room access or a reduced-cost "single-user" PDF.

Q: Can I use DIN EN 13155 for lifting accessories in the USA? A: Not directly. In the US, ASME B30.20 (below-the-hook lifters) applies. However, EN 13155 is often accepted as a reference for multinational corporations or when exporting to Europe.

Q: Does the PDF include the A2 amendment? A: Only if the product title says "including Amendment A2:2016." Do not buy a file dated solely 2009.

Q: Is there a simplified checklist from the standard? A: No official checklist exists, but many notified bodies provide compliance templates based on the standard's Annexes.

Q: How many pages is the full standard? A: Approximately 112 pages (including covers, 6 annexes, and a bibliography).

Q: Can I print the PDF? A: Yes, official PDFs from DIN Media allow printing for internal use.

Keywords: din en 13155 pdf, EN 13155 lifting attachments, non-integrated lifting equipment standard, crane safety standard, download DIN EN 13155, vacuum lifter standard, magnetic lifter standard, CE marking lifting gear.

The DIN EN 13155 standard specifies safety requirements for non-fixed load lifting attachments used with cranes, hoists, and manually controlled load-manipulating devices. It ensures these attachments—which are not permanently joined to the lifting machine—are designed and verified to prevent hazards such as mechanical failure or load slipping. Key Covered Equipment

The standard applies to a wide variety of "below-the-hook" lifting accessories, including: Plate Clamps: Used for gripping and lifting steel plates.

Vacuum Lifters: Both self-priming and pump/turbine-driven versions.

Lifting Magnets: Electric, permanent, and electro-permanent types.

Lifting Beams and C-hooks: Common structural attachments for specific load shapes. Staying current with these updates means always having

Lifting Forks and Clamps: For handling palletized or bulk loads.

Lifting Insert Systems: Specifically for use in normal-weight concrete. Critical Safety Requirements

Mechanical Strength: Attachments must meet specific static and dynamic strength requirements to withstand their Working Load Limit (WLL).

Slipping Safety Factor: For devices operating on a friction basis, the safety factor against the load slipping must be at least 2.

Marking: Every item must be marked with the manufacturer's name, year of manufacture, WLL, and the CE mark.

Verification: Manufacturers must perform type-testing or calculation to verify safety measures, often following procedures outlined in Annex A. Current Version & Access

The most recent version is DIN EN 13155:2022-03. It superseded the long-standing 2003+A2:2009 edition. DIN EN 13155 - 2022-03

DIN EN 13155:2022-03 outlines safety requirements for non-fixed load lifting attachments, including verification methods like 3x WLL for yield strength. The standard covers various equipment such as magnets and vacuum lifters. Official copies are available for purchase from DIN Media. DIN EN 13155:2022-03 - NormSplash

The DIN EN 13155 standard is a critical European safety regulation specifically designed for non-fixed load lifting attachments. Often referred to as "below-the-hook" equipment, these are detachable tools used with cranes, hoists, and manually controlled manipulating devices to secure a load during transport.

Finding a DIN EN 13155 PDF is essential for engineers, safety officers, and manufacturers to ensure that lifting beams, magnets, and clamps meet the stringent mechanical and functional safety requirements mandated by the EU Machinery Directive. Scope of DIN EN 13155

The standard covers a wide range of specialized lifting accessories that are not permanently attached to the crane. These include:

The DIN EN 13155 standard provides comprehensive safety requirements for "non-fixed load lifting attachments" used with cranes, hoists, and manual load manipulators. It serves as a critical guide for manufacturers, safety engineers, and operators to ensure that detachable equipment—like magnets or lifting beams—does not fail or drop loads during operation. 1. Scope: What is Covered?

The standard specifically addresses detachable lifting tools that are not permanently attached to the crane.

Included Equipment: Plate clamps, vacuum lifters, lifting magnets (electric, permanent, or electro-permanent), C-hooks, lifting forks, lifting beams, and lifting insert systems for concrete.

Excluded Items: Slings, ladles, buckets, and power-operated container handling spreaders (these are covered by other standards like EN 15056).

Operating Limits: It does not cover operations in explosive atmospheres, noise hazards, or the lifting of people. 2. Key Technical Requirements

To maintain safety, the standard defines rigorous design and testing criteria based on the number of expected "duty cycles". Safety Factors (Static Strength):

Elastic Condition: Attachments must hold 2 × Working Load Limit (WLL) without any permanent deformation.

Yielded Condition: They must hold 3 × WLL without releasing the load, even if the attachment itself becomes permanently deformed.

Fatigue Strength: For equipment intended for more than 16,000 duty cycles, the design must account for fatigue, similar to the requirements for full cranes.

Automatic Systems: Vacuum lifters and magnets have specific monitoring requirements, typically needing a Performance Level 'c' (Category 3) to alert operators of potential failures. 3. Verification and Documentation

Conformity with the standard is verified through two main routes: calculation or testing.

Technical File: Manufacturers must maintain a technical file containing assembly drawings, risk assessments, and test records.

Markings: Every attachment must feature a type plate with a CE-mark (or equivalent conformity marking) and a clearly indicated Maximum Allowable Load.

Verification Methods: For single units, both type and individual verification are required. For mass-produced series, type verification is done on representative units.

DIN EN 13155 standard is a comprehensive European safety document that outlines the requirements for the design, testing, and inspection of non-fixed load lifting attachments used with cranes and hoists iTeh Standards Scope and Purpose

This standard ensures that lifting accessories—any device placed between the crane hook and the load—are built to withstand specific mechanical stresses and operate safely Covered Equipment Lifting Beams and Spreaders : Essential for stabilizing long or awkward loads iTeh Standards Plate Clamps and Clamps : Used for gripping materials like steel plates iTeh Standards Vacuum Lifters : Both self-priming and non-self-priming types iTeh Standards Lifting Magnets

: Electric (mains or battery), permanent, and electro-permanent models BSI Knowledge C-Hooks and Lifting Forks : Common in industrial material handling iTeh Standards Lifting Insert Systems : Specific requirements for precast concrete products NormSplash Key Exclusions : This standard does

cover slings, ladles, buckets, or equipment used for lifting people, nor does it apply to attachments in direct contact with food or pharmaceuticals requiring high hygiene iTeh Standards Critical Safety Requirements

The standard provides a framework for ensuring structural integrity and operational safety Https://Www.En-Standard.Eu Lifting Accessories DIN EN 13155 - zt-grassberger