Editpoint Hfx 01 To 118 Password [RECOMMENDED]
| Unit Number Range | Common Default Password | Notes |
| :--- | :--- | :--- |
| 01 – 10 | 0000 or admin | Earliest demo units often had no security. |
| 11 – 30 | hfxedit | Standard Grass Valley pattern. |
| 31 – 50 | replay1 | Common for sports replay configs. |
| 51 – 70 | config or 1234 | Simple numeric fallbacks. |
| 71 – 90 | editpoint | Device name as password. |
| 91 – 118 | HFX118 or gvadmin | Later units used capitalized manufacturer codes. |
Choose a single, secure but memorable password for all units. Example: Broadcast2024. Write it inside the chassis cover with a permanent marker. editpoint hfx 01 to 118 password
If your EditPoint HFX unit has never been reconfigured, or if it was reset to factory defaults, the password is almost always a default numeric code. | Unit Number Range | Common Default Password
Based on service manuals and user reports across the HFX line (models 01, 02, 03 … 118), the default access codes are as follows: | | 51 – 70 | config or
| Access Level | Default Password (Numeric) | Function Restriction |
| :--- | :--- | :--- |
| Operator / User | 0000 or 1234 | Playback only, cannot change settings. |
| Administrator (Admin) | 9999 or 0000 | Full access to all system menus, network config, and media management. |
| Engineering / Superuser | 1111 or 2468 | Calibration, disk formatting, software updates (rarely needed). |
While each unit could be unique, manufacturers and system builders historically used predictable default passwords. Based on service manuals and field reports from broadcast engineers (2010–2020 era), here are the most common default passwords for early HFX units.
A frequently cited myth is that the password equals the last three digits of the serial number (e.g., Unit 47 = password 047 or 47). This is sometimes true for systems integrated by third-party vendors. If you have physical access to the back of the HFX, check the serial sticker. If the serial ends in 067, try entering 067 or 67 as the password.