Some users have created custom EGS002 parts. Search for:
Warning: Third-party libraries may be incomplete, buggy, or lack the EG8010 firmware model — often they are just a schematic symbol with no functional simulation.
If you are trying to design a PCB, you can create your own package in the Library Manager easily because the EGS002 has a simple pinout (2 rows of pins).
If you are trying to simulate the circuit to see if it works: Do not use the EGS002 block. Replace it with an Arduino Uno in the simulation running an SPWM code. This is the standard way to simulate this type of inverter in Proteus because the physics of the EG8010 chip logic is not publicly available for modeling.
The EGS002 driver module is a specialized pure sine wave inverter driver board based on the EG8010 ASIC and IR2110S gate driver. In the context of Proteus, "EGS002 library" refers to custom-made simulation models, schematic symbols, and PCB footprints that allow engineers to design and test inverter circuits digitally before physical prototyping. Role and Architecture of the EGS002
The EGS002 serves as the "brain" of a DC-AC power converter. Its core features include:
EG8010 Control Chip: A digital pure sine wave generator with integrated dead-time control, soft start, and feedback logic.
IR2110S Gate Drivers: High-speed MOSFET/IGBT drivers capable of managing high-side and low-side power stages.
Protection Mechanisms: Built-in safeguards for over-voltage, under-voltage, over-current, and over-temperature.
Configurability: Jumper settings for 50Hz/60Hz output and various dead-time intervals (300nS to 1.5uS). Importance of the Proteus Library
Since the EGS002 is not a default component in the standard Proteus database, a dedicated library is required for several reasons:
Functional Simulation: Advanced VSM (Virtual System Modeling) libraries allow users to simulate Sinusoidal Pulse Width Modulation (SPWM) and observe the resulting waveforms on a virtual oscilloscope. egs002 proteus library
PCB Layout Design: The library provides the exact 17-pin physical footprint required to seat the daughterboard onto a motherboard PCB.
Error Reduction: Testing feedback loops (IFB and VFB) in Proteus helps prevent the accidental destruction of physical MOSFETs during hardware testing. EGS002 Sinusoid Inverter Driver Board User Manual
The EGS002 is a popular driver board used to create Pure Sine Wave Inverters, typically featuring the EG8010 chip and IR2110 drivers. Because it isn't included in the standard Proteus library, you must manually add third-party files to simulate it. 📥 1. Find & Download the Library
You cannot "create" this complex module from scratch easily; you must download the library files (usually .LIB and .IDX files) from specialized community sites.
Search for "EGS002 Proteus Library" on sites like The Engineering Projects or Electronics-Lab.
Ensure the package includes the HEX file for the EG8010 chip if you plan to run a full firmware simulation. 📂 2. Install the Files
Once you have the .zip file, extract it and follow these steps to make Proteus recognize the new part: Locate your Proteus Library folder:
Usually found at: C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\Data\LIBRARY
Or: C:\ProgramData\Labcenter Electronics\Proteus 8 Professional\LIBRARY (Note: ProgramData is often a hidden folder). Copy and Paste: Move the .LIB and .IDX files into that folder. Restart Proteus:
If Proteus was open, close and reopen it to refresh the database. 🛠️ 3. Using the EGS002 in Your Schematic Pick the Device:
Open the Component Mode (P) and search for "EGS002" or "EG8010". Assign the Firmware: Double-click the component in your schematic. Some users have created custom EGS002 parts
In the Program File field, link the .HEX file that came with your library. Connect Power and Gates:
Connect the LO/HO (Low/High side) outputs to your MOSFET H-Bridge.
Provide a stable 12V (VCC) and 5V (VCL) as required by the board pinout.
💡 Pro Tip: If the simulation runs slowly, it's often due to the high-frequency PWM switching. You may need to increase the Simulation Time Step in the "System -> Set Animation Options" menu to prevent "CPU Load" errors. To help you get the circuit running, should I look for: A standard circuit diagram for an EGS002 inverter?
Troubleshooting steps for "Simulation is not running in real time" errors?
Guidance on setting up the H-Bridge (IRF3205/IRFP260) in Proteus?
EGS002 Proteus Library is a custom-made component package used to simulate the popular EGS002 Pure Sine Wave Inverter driver module in the Proteus Design Suite. While the official Proteus library does not natively include this module, several third-party libraries have been developed by the hobbyist community to allow for virtual prototyping of 50Hz/60Hz inverter circuits. Key Features of the EGS002 Module Model The EGS002 module is based on the EG8010 SPWM control chip IR2110S driver chips . A functional Proteus model typically includes: 17-Pin Interface : Mimics the physical footprint of the module. SPWM Generation
: Simulates the Sine Pulse Width Modulation signals for H-bridge switching. Feedback Simulation
: Allows testing of Voltage Feedback (VFB), Current Feedback (IFB), and Temperature Feedback (TFB) for protection logic. LCD Interface
: Often includes support for the 1602 LCD module simulation to display real-time status. Component Search Engine How to Install the EGS002 Library
To use the EGS002 in your project, you must manually add the library files to your Proteus installation: Proteus: PCB Design and Circuit Simulator Software Warning : Third-party libraries may be incomplete, buggy,
Connect SPWM outputs to IR2110:
Set the output frequency:
Configure dead time: Leave DT0, DT1, DT2 open (default dead-time ~2µs) or connect to VCC/GND per the datasheet.
Connect the H-Bridge:
EGS002 is a Proteus-compatible parts library package that provides schematic symbols, PCB footprints, and simulation models for the EGS002 family of solid-state/reed/photonic (context depends on vendor) relay and driver modules widely used in hobbyist and industrial electronic designs. The library bundles ready-to-use components so designers can drop accurate representations into Proteus schematic capture, run interactive simulations where supported, and export PCB layouts with correct footprint dimensions.
If you absolutely need the graphic symbol to complete a PCB layout (rather than simulation), you can check these sources, but be wary of viruses or non-functional files:
Example (conceptual) hookup:
In the world of power electronics, the EGS002 (often referred to as the EG8010+IR2110 driver board) has become a legendary piece of hardware. It is a standalone SPWM (Sinusoidal Pulse Width Modulation) generator capable of converting a DC bus into a stable AC sine wave output. However, for students and engineers designing pure sine wave inverters, a significant bottleneck exists: you can't simulate the EGS002 directly in Proteus without the correct library.
Proteus ISIS is the industry standard for microcontroller simulation and analog circuit design. But until recently, simulating the complex logic of a dead-time-controlled, closed-loop SPWM chip was impossible without a dedicated model.
Enter the EGS002 Proteus Library – a community-driven solution that bridges the gap between theoretical design and practical hardware.
This article provides a deep dive into what the EGS002 library is, how to install it, configure the EG8010 simulation model, and troubleshoot common errors.
Cause: The EG8010 model requires a dynamic link library (e.g., eg8010.dll).
Fix: Place the .DLL file in the Proteus 8 Professional\BIN folder. For 64-bit systems, ensure the DLL is 32-bit compatible (Proteus is 32-bit).