| LED Status | Meaning | |-------------|---------| | Red (Power) | AC power applied | | Yellow (Charging) | Charging in progress | | Green (Charged) | Battery at ≥12.6V (float maintenance begins) | | Flashing Red (Reverse) | Clamps reversed – correct immediately |
| Feature | Detail | |---------|--------| | Compatible Batteries | 12V Lead-Acid (Wet, AGM, Gel, Maintenance-Free) | | Charge Rate | 6 Amp fast charge, 2 Amp slow / maintain | | Engine Start | No (not a jump starter – charger only) | | Reverse Polarity Protection | Yes (internal fuse or circuit breaker) | | LED Indicators | Power, Charging, Charged, Reverse Polarity |
To ensure your EverStart 60108m lasts a decade:
The 60108M is excellent for winter storage. If you are storing a vehicle for months, you can leave the charger connected. It will automatically switch to "Float/Maintenance" mode once the battery is full, ensuring your vehicle starts right up in the spring.
Note: This guide serves as a reference. Always refer to the official EverStart documentation included with your specific unit for the most accurate safety specifications.
The EverStart 60108M is a smart digital battery charger that handles 12V automotive and marine batteries. It features 2A, 10A, and 25A charging rates and a specialized reconditioning mode. ⚡ Quick Start Guide everstart battery charger 60108m manual
Connect Clamps: Attach the Red (+) clamp to the positive terminal and the Black (-) clamp to the negative terminal or chassis ground.
Plug In: Connect the AC power cord to a standard 120V outlet.
Select Battery Type: Use the menu to select Standard (Wet), AGM, or Gel. Choose Charge Rate: 2A: Slow trickle charge for maintenance. 10A: Faster charging for standard use. 25A: Rapid charging for large or deeply drained batteries. Start: Press the Charge button to begin. 🛠️ Advanced Features Recondition Mode
This mode uses electric pulses to reduce sulfation on battery plates, which can restore lost capacity.
When to use: If the battery is old or hasn't been used in a long time. | LED Status | Meaning | |-------------|---------| |
Action: Press the Recondition button; the unit will cycle and pause to check voltage.
Tip: If no improvement occurs after 5 cycles, the battery is likely beyond repair and should be recycled. Boost/Engine Start Assist
While not a portable jump starter, this mode provides a high-current burst to help start a vehicle.
Procedure: Select Engine Start, wait for the 60-second countdown, then attempt to crank the engine in 3–5 second bursts. "Dead Battery" Override
Digital chargers often won't start if they detect less than 2V. To "wake up" a dead battery: Note: This guide serves as a reference
Briefly connect a healthy 12V battery to the dead one with jumper cables. Plug in the 60108M and start the charge.
Once the charger detects a load and begins charging, remove the jumper cables. ⚠️ Safety Precautions
Ventilation: Always charge in a well-ventilated area to prevent gas buildup.
Marine Batteries: Must be removed from the boat and charged on shore unless you have specific on-board equipment.
Order of Removal: Unplug the AC cord first, then remove the negative (black) clamp, then the positive (red) clamp. Troubleshooting