Replace with actual hosted URLs
Step 1: Install Drivers Disable Windows Driver Signature Enforcement (on Windows 10/11). Run the MTK driver installer as Administrator. Reboot your PC.
Step 2: Launch SP Flash Tool
Extract the SP Flash Tool folder and run flash_tool.exe as Administrator.
Step 3: Load the Scatter File
Step 4: Configure the Tool
Step 5: Connect the Tablet
Step 6: Wait for the Green Tick The progress bar will turn yellow (downloading), then red, then purple. When you see a green checkmark, the flash is complete. Unplug the tablet and press the power button. Firmware BLACKVIEW Tab 50 Kids
If nothing happens:
Official sources (BLACKVIEW does not publish on Google servers):
Unofficial but often reliable mirrors (verify checksums): Replace with actual hosted URLs
When you download BLACKVIEW_Tab50_Kids_Firmware.zip, ensure it contains:
Flashing firmware requires a Windows PC, a USB cable (data-sync capable, not just a charging cable), and patience. This process will wipe all data on the tablet.
The BLACKVIEW Tab 50 Kids is a rugged, child-friendly tablet designed with parental controls, a shockproof case, and eye protection mode. Keeping its firmware up to date ensures optimal performance, security patches, and compatibility with kids' learning apps. Step 1: Install Drivers Disable Windows Driver Signature
This guide provides official firmware (stock ROM) information, update instructions, and troubleshooting for the Tab 50 Kids.
| Problem | Solution | |---------|----------| | SP Flash Tool error: S_BROM_CMD_STARTCMD_FAIL | Driver issue – reinstall MTK VCOM drivers, use USB 2.0 port. | | Tablet stuck in boot loop after flash | Re-flash using Firmware Upgrade, then wipe cache from recovery mode. | | Error: STATUS_SEC_IMG_TYPE_MISMATCH | Wrong firmware version – download correct one for Tab 50 Kids. | | No preloader/vcom detection | Try different USB cable, port, or PC. Disable USB selective suspend. | | Touchscreen not working after flash | Flashed wrong userdata or boot image – reflash full firmware. |