The latest revision of the gorenje wdi 63113 manual new lists these frequent user errors:
Your new manual includes a maintenance timetable that was missing in older versions:
| Frequency | Action | Reference Page | |-----------|--------|----------------| | After each dry cycle | Clean the primary lint filter (inside door rim) | p. 18 | | Every month | Wipe door seal (fold back the rubber) to remove coins/hairpins | p. 19 | | Every 3 months | Remove and rinse the condenser drying unit (bottom-left panel) | p. 22 | | Twice a year | Run a 90°C empty wash with descaling powder | p. 24 | gorenje wdi 63113 manual new
If the control panel is unresponsive, the Child Lock may be active.
Q: Can I use the WDI 63113 as a washer only? A: Yes. Simply turn the dial to a wash program and do not press the "Drying" button. The manual confirms the drying heater will remain off. The latest revision of the gorenje wdi 63113
Q: Why does my new manual show different energy ratings than the old one? A: The EU energy label changed in March 2021. A gorenje wdi 63113 manual new reflects the rescale (e.g., A+++ became C). This is not a product change—just a labeling change.
Q: The manual says "max 4 kg dry" but I dried 5 kg once. Is it okay? A: No. The new manual includes a warning: Drying more than 4 kg causes the motor to overheat, tripping the thermal fuse. This is an expensive repair not covered by warranty. gorenje wdi 63113 manual new
Solution: Check that the door is completely shut (you should hear a click). Also, ensure the child lock is not active. To disable child lock: Press and hold the "Start/Pause" button for 5 seconds until the key icon disappears from the display.
6.1 Cleaning the Filter Located at the bottom right behind the service flap.
6.2 Descaling Use a descaling agent specifically for washing machines every 3–6 months depending on water hardness to maintain heater element efficiency.
6.3 Common Fault Codes
