Huawei+atn+910da+datasheet+exclusive

Network architects prize the ATN 910D-A for three niche scenarios:

Availability note: Huawei lists the ATN 910D-A as Active but may prioritize it for specific verticals (transport, utilities, defense) rather than general enterprise. This “exclusive” sales channel is why detailed public datasheets remain scarce.

To procure the exclusive ATN 910DA correctly, avoid confusion with the base 910D. Use these part numbers:

Exclusive Warning: The 910DA does not accept the AC power module of the 910C. Attempting to insert it will short the backplane. Always verify PSU voltage before insertion.

A key exclusive detail: The 910DA lacks the AC power port found on consumer routers. It operates strictly on DC power.

The ATN 910DA runs Huawei VRP8 (Versatile Routing Platform) , the same OS as the NE40E. Exclusive to the DA model, the software build includes "CE-Enhance" package. huawei+atn+910da+datasheet+exclusive

# Set WAN to cellular with DHCP
interface wan0
  type cellular
  sim-slot 1
  auth auto
  ip dhcp
# Enable NAT and DHCP on LAN
interface lan0
  type ethernet
  ip 192.168.1.1/24
  dhcp server start 192.168.1.100-192.168.1.200
# Basic firewall
firewall rule 1 permit from lan to wan service all
firewall nat 1 source lan0 to wan0 masquerade

Power substations require IEC 61850. The 910DA’s extended temperature and dual DC feed ensure uptime. The 8xE1 ports capture legacy RTUs (Remote Terminal Units) while the GE ports handle modern IP cameras.

Huawei does not openly advertise the CPU architecture, but exclusive teardown analysis reveals the 910DA uses a dual-core NP (Network Processor) – specifically, a derivative of the Huawei Solar series scaled down.

Exclusive Performance Floor: Unlike the ATN 910C which throttles under high ACL (Access Control List) rules, the 910DA uses hardware-based TCAM. You can apply up to 512 ACL rules without dropping below 5 Mpps.

This is where the "DA" series distinguishes itself from standard access nodes.

Huawei ATN 910D-A is a compact, high-capacity 1U fixed-port router designed primarily for 5G base station access and VIP private line services Network architects prize the ATN 910D-A for three

. It features an 800Gbps system capacity and supports advanced 5G-ready features such as SRv6, FlexE slicing, and high-precision clock synchronization. Key Technical Specifications System Capacity 800Gbps switching capacity Interface Density 4 x 100GE/50GE + 16 x 25GE/10GE/GE + 8 x 10GE/GE/FE Dimensions (HxWxD) 44.45mm (1U) x 442mm x 220mm Approximately 4kg Power Input Dual DC/AC, 1+1 backup redundancy Power Consumption Typical: 180W Operating Temp -40°C to +65°C, supporting outdoor cabinet deployment Exclusive & Advanced Features 5G Ready Architecture : Supports

(Segment Routing over IPv6) and EVPN for simplified network evolution and automated service deployment. Network Slicing : Utilizes

(Flexible Ethernet) technology to provide hard-pipe isolation for different services, ensuring zero interference between slices. Intelligent O&M : Integrated with

(In-situ Flow Information Telemetry) for real-time, millisecond-level service quality monitoring and fault location. High Precision Sync : Supports

and G.8275.1/G.8275.2 protocols for ultra-precise clock synchronization required by 5G networks. Carrier-Grade Reliability Availability note : Huawei lists the ATN 910D-A

: Features less than 50ms protection switching and supports technologies like

(Topology-Independent Loop-free Alternate) for rapid failover. Deployment Scenarios 5G Transport

: Ideal for base station access due to its high-density 100GE/50GE ports and compact 220mm depth, allowing it to share cabinets with wireless Baseband Units (BBU). Enterprise Private Lines

: Provides multi-service access for VIP customers using L2VPN, L3VPN, and HQoS for guaranteed service levels.

For further technical documentation and manuals, you can visit the Huawei ATN 910D Support Guide Enterprise Product DataSheet ATN 910D-A Brochure v2.0 | PDF - Scribd