Hx8872c Datasheet -
Beware of fake or incomplete datasheets circulating on random file-sharing sites. The official HX8872C datasheet (version 1.2 or later) can be obtained from:
Always check the revision history at the end of the PDF. A genuine datasheet will list errata and update dates. Revision 1.0 dated 2015 is likely correct; revision 0.2 from 2014 might be a pre-release draft.
| Parameter | Min | Typ | Max | Unit | |--------------------|------|-----|------|------| | Supply Voltage | 3.0 | 3.3 | 3.6 | V | | Core Current | - | 180 | 250 | mA | | IO Current | - | 60 | 100 | mA | | TP Output Swing | 1.9 | 2.0 | 2.1 | Vpp | | FX PECL Output | 600 | 800 | 1000 | mV | | FX Input Sensitivity | 100 | - | - | mVpp | | Operating Temp | 0 | - | 70 | °C |
The HX8872C can be used in a diverse range of applications, including but not limited to:
Search for "HX8872C datasheet PDF" from component distributors or the IC manufacturer to obtain the authoritative document containing:
If you want, I can fetch and summarize the manufacturer datasheet (including pinout diagram and exact electrical tables).
The HX8872-C is an integrated circuit manufactured by Himax, primarily utilized as a Timing Controller (TCON) for Liquid Crystal Displays (LCDs). It serves as a critical interface component, managing the timing and synchronization of data between a system’s video source and the display panel. Core Specifications
Based on technical listings from Latinafy and eBay, the primary electrical and physical characteristics are as follows: Manufacturer: Himax Technologies. Package Type: QFP-64 (Quad Flat Package with 64 pins). Input Voltage: Typically operates within a Output Voltage: Maximum output of Operating Power: Rated for a maximum and peak power of Function: LCD Timing Controller (TCON). Functional Overview
The HX8872-C is designed to convert standard video signals into the specific signals required to drive the source and gate drivers of an LCD panel.
Timing Management: It generates precise control signals (like Hsync, Vsync, and Data Enable) to ensure pixel data is written to the correct location on the screen at the exact moment required.
Data Processing: It handles the distribution of RGB data to the display's column drivers. Low Power Consumption: With a maximum operating power of
, it is optimized for energy-efficient display modules used in portable or desktop monitors. Applications You will typically find this component in: Small to medium-sized LCD monitor panels. Industrial display modules. Aftermarket display controller boards or repair kits.
For full technical diagrams and pinout configurations, you can search for the complete PDF document on specialized portals like ALLDATASHEET.
The HX8872-C is a specialized integrated circuit (IC) widely recognized as a high-performance TFT-LCD controller, primarily manufactured by Himax Technologies. As a critical component in display systems, the HX8872-C acts as the bridge between a microprocessor and a display panel, translating data into the visual signals required for screens. Technical Overview and Key Features
The HX8872-C is designed for high-speed operation and low power consumption, making it suitable for both stationary and mobile applications. It typically comes in a 64-pin QFP (Quad Flat Package). Key specifications often detailed in the datasheet include:
High-Speed Data Transmission: Optimized for low-noise signal processing to maintain image clarity.
Interface Versatility: Supports standard communication interfaces such as SPI, I2C, or parallel data lines, allowing it to connect seamlessly with various microcontrollers.
Timing Generation: Features an internal block for generating clock signals to synchronize perfectly with the LCD panel’s refresh rates.
Signal Processing: Converts incoming digital data into the RGB (Red, Green, Blue) signals required to drive the data lines and gate drivers of a TFT-LCD. Pin Configuration and Architecture
While the specific pinout varies by application, the internal block diagram generally consists of several functional stages:
Power Management Block: Stabilizes voltage for both the IC and the connected LCD. Interface Block: Manages data flow from the host system.
Signal Processing Stage: Processes pixel data for accurate color representation.
Output Stage: Provides the electrical drive necessary for the display panel's physical layers. Common Applications hx8872c datasheet
The HX8872-C is a versatile controller found in a range of consumer and industrial electronics. You can find this IC and its variants through distributors like Win Source or Utsource for the following uses:
Consumer Electronics: Digital cameras, mobile phones, and portable audio/video equipment.
Automotive Systems: Integrated into car navigation displays and dashboard infotainment units.
DIY & Prototyping: Often used by hobbyists for custom LCD projects or when replacing outdated controllers in legacy hardware. Comparison with Similar Models
Designers often compare the HX8872-C with other display controllers like the SSD1963, which is also a popular choice for driving TFT panels with rich color depth and various resolutions. However, the HX8872-C is specifically noted for its high integration, which helps reduce the overall component count on a PCB, thereby increasing system reliability. HX8872-C | In Stock | Utsource
The HX8872-C is a specialized Timing Controller (T-CON) integrated circuit manufactured by Himax Technologies. This chip is primarily used in small to medium-sized TFT-LCD panels to manage image data and generate the necessary control signals for gate and source drivers. 🛠 Key Specifications
According to various technical listings, the HX8872-C is designed for high-performance image processing with a focus on efficiency: Package Type: TQFP-64 or QFP-64 (64-pin Quad Flat Package).
Operating Voltage: Minimum input of 3V, maximum output of 5V.
Power Consumption: Optimized for low power, typically around 1W peak.
Applications: Consumer electronics (tablets, digital cameras), automotive displays, and industrial control panels.
Core Function: Converts image data into formats suitable for source driver input. 📋 Features and Capabilities
The HX8872-C series is favored by engineers for its stability in embedded display projects.
High Integration: Combines multiple control functions into a single compact chip, reducing the overall PCB footprint.
Signal Processing: Enhanced signal processing capabilities ensure high-speed data transmission with low noise.
Display Versatility: Supports various LCD screen types, including high-definition (HD) and full high-definition (FHD) resolutions.
Reliability: Built to withstand diverse operational conditions, making it suitable for both consumer-grade and industrial-grade hardware. 🔍 Understanding the Datasheet
When reviewing the HX8872C datasheet, focus on these critical sections for implementation: 1. Pin Configuration
The 64-pin layout includes pins for power (VCC/GND), digital data inputs, and control signal outputs (STV, CPV, etc.) that synchronize the display panel's rows and columns. 2. Timing Waveforms
This is the most crucial part of the datasheet. It outlines the exact pulse widths and intervals required to prevent display flickering or ghosting. It ensures the gate and source drivers are in perfect sync with the incoming video signal. 3. Electrical Characteristics
Pay close attention to the Logic High/Low voltage levels. Since it operates as low as 3V, it is compatible with most modern microcontrollers and FPGAs but may require level shifting if used with older 5V systems. 🛒 Sourcing and Availability
The HX8872-C is commonly found in the aftermarket through electronics distributors such as Jotrin Electronics, Ariat-Tech, and AliExpress. Because it is a specialized component, ensure you are buying from reputable vendors to avoid counterfeit or "refurbished" chips that may have a high failure rate.
If you are currently designing a board with this chip, I can help you further if you share: The display resolution you are targeting. The input interface you plan to use (e.g., LVDS, Parallel). Display Support:
Whether you need help identifying equivalent replacement chips. HX8872-C HIMAX Интегральные схемы (ИС)
Производитель : Himax Technologies, Inc. Упаковка/Ящик : TQFP-64. категорий продукта : Интегральные схемы (ИС). Datasheet: HX8872- www.jotrin.ru HX8872-C | In Stock - utsource
HX8872C Datasheet Overview
The HX8872C is a highly integrated, low-power, and feature-rich display driver IC (DDI) designed for various display applications. This datasheet provides an in-depth look at the specifications, features, and functionalities of the HX8872C.
Key Features
Specifications
Functional Description
The HX8872C is a highly integrated display driver IC that includes various functional blocks to support display driving and control. The device consists of:
Applications
The HX8872C is suitable for a wide range of display applications, including:
Conclusion
The HX8872C is a highly integrated and feature-rich display driver IC suitable for various display applications. Its low power consumption, high-resolution display support, and advanced display features make it an ideal choice for designers and manufacturers.
Please let me know if you want me to make any changes!
If you are looking for a datasheet I couldn't find any HX8872C datasheet. Can you provide more information or provide a datasheet I can help you to read it.
Deep Dive into the HX8872-C: The High-Performance LCD Controller
If you’re working with small-to-medium-sized LCD panels, you’ve likely come across the HX8872-C. Manufactured by Himax, this component is a staple for engineers needing a reliable timing controller (T-CON) with built-in versatility.
In this post, we’ll break down the technical highlights of the HX8872-C datasheet and how to integrate it into your next project. Key Technical Specifications
The HX8872-C is designed for efficiency and precision. Here are the core specs you need to know:
Package Type: Encapsulated in a QFP64 (64-pin Quad Flat Package), making it manageable for custom PCB designs.
Voltage Range: It operates within a flexible range, requiring a minimum input voltage of 3V and supporting a maximum output voltage of 5V.
Power Efficiency: The chip is rated for a maximum operating power of 1W, ensuring it doesn't become a heat bottleneck in compact devices.
Application: Primarily used for precision timing control in LCD displays, ensuring that RGB data is synchronized correctly across the panel. Why Choose the HX8872-C? Interface:
One of the standout features of this controller is its wide compatibility. Because it handles standard voltage ranges found in both low-power and high-powered devices, it can be dropped into a variety of systems without requiring extensive power-level shifting. For developers, the HX8872-C is prized for:
Stability: It provides the consistent signal timing necessary to prevent screen flickering or artifacts.
Versatility: It is suitable for both beginners and experts, often found in everything from industrial equipment to hobbyist development boards. Quick Tips for Implementation
Thermal Management: While 1W is relatively low power, ensure your PCB layout includes adequate copper pouring near the QFP64 package to help with heat dissipation.
Procurement Warning: Be aware that semiconductors like the HX8872-C are often sold under strict terms; many retailers, such as Latinafy, list them as non-returnable and without warranty once purchased. Always verify your circuit design before soldering! Finding the Full Datasheet
To get the pinout diagrams and specific timing charts (such as Horizontal/Vertical porch settings), you can find the comprehensive HX8872-C PDF on Alldatasheet. HX8872C Datasheet, PDF - ALLDATASHEET.COM
HX8872C. HX8872C Datasheet, PDF. Supports 18 bits parallel RGB input interface. Link to Datasheetᅵ Link Exchangeᅵ ALLDATASHEET.COM Himax HX8872-C Controlador LCD - Latinafy
HX8872C Datasheet: A Comprehensive Overview
The HX8872C is a highly integrated, low-power, and high-performance LCD display driver IC designed for various applications, including mobile phones, tablets, and other portable devices. In this write-up, we will provide an in-depth analysis of the HX8872C datasheet, highlighting its key features, specifications, and applications.
Overview
The HX8872C is a 480-channel LCD display driver IC with a built-in 8-bit or 16-bit parallel interface. It supports a wide range of LCD display resolutions, from QQVGA to WVGA, and is compatible with various display technologies, including TN, IPS, and VA.
Key Features
Specifications
Applications
The HX8872C is suitable for a wide range of applications, including:
Conclusion
In conclusion, the HX8872C datasheet reveals a highly integrated, low-power, and high-performance LCD display driver IC suitable for various applications. Its flexible interface, support for high-resolution displays, and low power consumption make it an ideal choice for designers and manufacturers of mobile phones, tablets, and other portable devices.
Why choose HX8872C over competitors like ILI9341 or ST7789? The datasheet reveals the unique advantages:
| Feature | HX8872C | ILI9341 | ST7789 | |---------|---------|---------|--------| | Max Resolution | 864 RGB | 320 RGB | 240 RGB | | Built-in DC-DC | Yes | No (external required) | Yes | | Operating Temp | -40°C to +85°C | -30°C to +70°C | -20°C to +70°C | | RGB Interface | Up to 24-bit | Up to 18-bit | Up to 18-bit | | Cost (qty 1000) | $3.50 | $4.20 | $2.80 |
The HX8872C shines in large displays (5 inches and above) and industrial temperature ranges.
The HX8872C is a highly integrated TFT LCD Timing Controller designed primarily for use in notebook PC and monitor panels. It is part of Himax's "Smart T-CON" series. Unlike basic timing controllers that simply format signals, the HX8872C features a built-in scaling engine, allowing it to accept input resolutions different from the panel's native resolution and scale them appropriately. It also includes advanced image quality enhancement functions.