Intronics produces several variants of digital room thermostats. Before proceeding, identify which model you have based on the display layout:
Note: This guide focuses primarily on the most common Model B (7-Day Programmable), but settings apply across most Intronics variants.
Prevents accidental changes. Press and hold UP + DOWN simultaneously for 5 seconds until “LOC” appears. Repeat to unlock.
This report provides a comprehensive user guide for the Intronics Digital Room Thermostat. As heating systems become more sophisticated, the interface between the user and the heating infrastructure is critical for energy efficiency and comfort. This document outlines the key features, control interface, programming instructions, and troubleshooting steps required to operate the device effectively.
To Set the Temperature:
To Switch Modes:
The Intronics digital room thermostat, particularly models like the Digital Room Thermostat II and DT-08, is designed for user-friendly operation of air conditioning and fan coil systems. Basic Operation intronics digital room thermostat user guide
Most Intronics digital thermostats use a simplified interface to manage your indoor climate:
Power On/Off: Press the main power button to toggle the unit. It typically resumes the last programmed settings upon starting.
Temperature Setting: Use the UP and DOWN arrow buttons to adjust the target temperature. On models with two displays, the larger number is often the current room temperature, while the smaller one is your setpoint.
Fan Speed: Select between three speeds (High, Medium, Low) or an AUTO mode that adjusts speed based on the temperature difference.
Mode Selection: Use the MODE button to cycle through functions like Cool, Fan, and Heat (depending on your specific model). Advanced Features
Intronics models often include specialized comfort and efficiency modes: Turbo Cool: Activates rapid cooling for immediate relief. Econo Function: Optimizes performance for energy savings. Note: This guide focuses primarily on the most
Sleep Mode: Gradually adjusts the temperature (raising it in Cool mode or lowering it in Heat mode) by 1°C after the first hour to save energy while you sleep.
Timer: Allows you to schedule the unit to turn on or off up to 15 hours in advance.
Sweep Control: On compatible units, this button toggles the oscillating fan motor. Setup & Configuration
For technicians or advanced users, the Digital Room Thermostat II has a hidden setup mode to customize system behavior:
Enter Setup: Press and hold the UP and DOWN buttons simultaneously for 3 seconds.
Navigate Parameters: Use the arrows to move through settings (e.g., P1 for Heat/Cool version, P3 for Celsius/Fahrenheit toggle). To Switch Modes:
Save/Exit: Press the MODE (or designated exit) button to save your changes. Note that pressing the POWER button before exiting may cancel your changes. Common Models & Compatibility
PI Series (PI02/PI04): Feature Proportional + Integral (P+I) control for more precise temperature maintenance.
DT-08: A two-piece unit suitable for mini-splits and chilled water systems, featuring a self-diagnostic mode and auto-restart capability.
Remote Units: Many models are compatible with Intronics wireless remote units for control from across the room. Intronics digital room thermostat user guide
Even digital tech can stumble. Here is how to fix the top 5 complaints.
Warning: Electrical installation must be carried out by a qualified electrician or heating engineer.
If you are replacing an old thermostat:
To clear all settings and restore factory defaults: