Even experienced electricians encounter issues. The PDF 11 helps solve these:
| Problem | Solution from Lanric PDF 11 | | :--- | :--- | | Conduit threads strip during installation | Check Section 2 for proper wall thickness. Use heavy-gauge for high-torque applications. | | Excessive corrosion after 6 months | Verify you ordered PVC-coated conduit (Section 7). Standard galvanized is not for chemical plants. | | Cannot pull wire through a bend | Refer to Section 5’s minimum bend radius. Your radius is too tight. | | Missing part number on distributor quote | Use Section 10’s cross-reference to find active replacement part. | lanric steel conduit catalogue pdf 11
While PVC and aluminum conduits exist, the Lanric steel conduit remains superior for specific applications referenced in PDF 11: Even experienced electricians encounter issues
The catalogue provides detailed charts. Below is a typical guide to the dimensions you will find in the PDF. These are the most common products found in the catalogue
| Nominal Size (mm) | Outside Diameter (OD) | Wall Thickness (approx) | Standard Length | | :--- | :--- | :--- | :--- | | 20mm | 20.0 - 20.3 mm | 1.5 - 1.8 mm | 3.75m or 4.0m | | 25mm | 25.0 - 25.3 mm | 1.8 - 2.0 mm | 3.75m or 4.0m | | 32mm | 32.0 - 32.3 mm | 1.8 - 2.0 mm | 3.75m or 4.0m | | 40mm | 40.0 - 40.3 mm | 2.0 - 2.2 mm | 3.75m or 4.0m | | 50mm | 50.0 - 50.3 mm | 2.2 - 2.5 mm | 3.75m or 4.0m |
Note: Conduits are usually supplied with a threaded end and a coupling (socket) attached, and protected by a plastic cap.
These are the most common products found in the catalogue. They are used for commercial and industrial installations where impact resistance is crucial.