Lipi Pb2 Passbook Printer Driver For Windows 10 64 Bit -

After installation:

Go to Printer Properties (not Preferences) → Advanced tab → Print Processor → ensure RAW is selected.

Device Settings tab (if present):

Before concluding the installation of the Lipi Pb2 Passbook Printer Driver for Windows 10 64 Bit, run through this checklist: Lipi Pb2 Passbook Printer Driver For Windows 10 64 Bit

The Lipi Pb2 is a specialized passbook/printer used primarily in banks, post offices, and utilities for printing on heavy, folded documents like passbooks. The driver in question is the official 64-bit version designed to work with Windows 10. After installation:

Once you have downloaded the correct driver package (usually a .zip or .exe), follow these steps precisely. Go to Printer Properties (not Preferences) → Advanced

| Problem | Solution | |--------|----------| | Driver not available for 64-bit | Try Lipi PB3 driver (backward compatible). Or use Epson LQ-2090 64-bit driver, but passbook features will break. | | Printer prints garbage / raw text | Wrong driver type (PCL vs ESC/P). Lipi PB2 uses ESC/P (Epson standard). Change driver to ESC/P one. | | Passbook skew / misalignment | Go to Printer Properties → Device Settings → Change “Passbook thickness sensor” to Enabled. | | USB not recognized | Try different USB port, reboot printer, reinstall driver with printer disconnected first. | | Printing very slow | In Printer Preferences → Advanced → Print Quality → Draft. Disable “Bi-directional” if available. | | Error light blinking | Check paper jam, passbook thickness, or ribbon end. Ribbon life: ~3 million characters. |

Follow on-screen prompts; restart the PC if instructed.

After reboot, print a test page or passbook sample from the printer properties or manufacturer’s utility.