Manual Controle Universal Articco Th-msur-40 -

The mount features three primary points of manual articulation, allowing installers to fine-tune the camera’s line of sight without tools (in most cases) after initial setup.

| Adjustment Axis | Movement Range | Manual Control Method | | :--- | :--- | :--- | | Pan (Horizontal Rotation) | 360° continuous | Loosen side locking screw; rotate base plate freely. | | Tilt (Vertical Angle) | 0° to 90° (or 180°, depending on model variant) | Loosen friction hinge knob; angle the camera pendant. | | Horizontal Leveling | ±5° to ±10° corrective tilt | Rotate the inner gimbal ball joint (if present) or use shims. | manual controle universal articco th-msur-40

Solution: The Articco TH-MSUR-40 is a mode-based remote. You must press the TV button before pressing VOL +/- to control the TV, or press AUX to control the soundbar. The remote does not automatically switch. The mount features three primary points of manual

| Parameter | Value | |--------------------|------------------------------| | Model | TH-MSUR-40 | | Control Type | Fully manual (no electronics)| | Input Required | Operator torque / force only | | Output Interface | Universal 6‑pin terminal or mechanical coupler | | Max Torque (rotary)| 40 Nm (hence “40” in model) | | Max Force (linear) | 2,500 N | | Operating Angle | 0–90° (rotary); 0–100 mm (linear with adapter) | | Enclosure Rating | IP54 (optional IP65) | | Ambient Temp | -20°C to +70°C | | Mounting | Bracket or panel mount (hardware included) | | | Horizontal Leveling | ±5° to ±10°