A typical MT3367_Android_scatter.txt contains the following key entries:
PRELOADER 0x0
MBR 0x800000
EBR1 0x804000
PRO_INFO 0x1000000
NVRAM 0x1400000
PROTECT_F 0x1c00000
PROTECT_S 0x1e00000
SECCFG 0x2000000
UBOOT 0x2040000
BOOTIMG 0x2080000
RECOVERY 0x2880000
SEC_RO 0x3080000
MISC 0x3880000
LOGO 0x3980000
EXPDB 0x3e00000
ANDROID 0x4400000 (System)
CACHE 0x4a400000
USRDATA 0x4e400000
Note: Addresses may vary by manufacturer (e.g., Eonon, Xtrons, Joying, or generic Chinese units). Always use the scatter file that came with your specific firmware.
In the world of car head units, DVD players, and budget automotive navigation systems, the MediaTek MT3367 holds a special place. While not as powerful as modern smartphone chips, this processor powers millions of aftermarket entertainment systems. mt3367 android scattertxt best
If you own an MT3367 device and want to root it, recover from a bootloop, or install a custom ROM, you will encounter one critical file: MT3367_Android_scatter.txt .
Here is everything you need to know about it. A typical MT3367_Android_scatter
| Partition Name | Linear Start Addr | Length | Flags | Description |
|----------------|------------------|--------|-------|--------------|
| pgpt | 0x0 | 0x2000 | R | Protective GPT (first LBA) |
| proinfo | 0x2000 | 0x300000 | R | Product info (serial, region) |
| nvram | 0x302000 | 0x500000 | R | Wi-Fi/BT MAC, IMEI (critical) |
| protect1 | 0x802000 | 0xa00000 | R | Protected system settings |
| protect2 | 0x1802000 | 0xa00000 | R | Mirror of protect1 |
| lk | 0x2202000 | 0x100000 | R | Little Kernel bootloader (ABOOT) |
| boot | 0x2302000 | 0x2000000 | R | Kernel + ramdisk (Android boot image) |
| recovery | 0x4302000 | 0x2000000 | R | Recovery mode kernel+ramdisk |
| secro | 0x6302000 | 0x600000 | R | Secure ROM data |
| logo | 0x6902000 | 0x800000 | R | Boot logo images |
| tee1 | 0x7102000 | 0x500000 | R | Trusted Execution Environment |
| tee2 | 0x7602000 | 0x500000 | R | TEE backup |
| metadata | 0x7b02000 | 0x2000000 | R | OTA metadata, encryption footer |
| system | 0x9b02000 | 0x80000000 | R | Android system image (ext4/erofs) |
| cache | 0x89b02000 | 0x19000000 | R | Cache partition |
| userdata | 0xa2b02000 | 0x??? | R | /data (size varies by eMMC) |
| flashinfo | END-0x800000 | 0x800000 | R | Reserved for BBT |
Addresses are in bytes (hex). MT3367 often uses 0x2000 (8KB) alignment. Note: Addresses may vary by manufacturer (e
Even the best scatter file can fail due to hardware variation. Here are common MT3367 errors and fixes:
| Error Message | Meaning | Solution |
| :--- | :--- | :--- |
| STATUS_PRELOADER_INVALID | Preloader address in scatter.txt is wrong. | Find a scatter file from a newer firmware version for your exact device model. |
| S_BROM_DOWNLOAD_DA_FAIL | DA (Download Agent) mismatch. | Use SP Flash Tool version v5.1536 (older versions handle MT3367 better). |
| STATUS_EXT_RAM_EXCEPTION | RAM configuration error. | Your device has LPDDR2 vs LPDDR3 mismatch. Generate scatter from a working device using Wwr_MTK. |