If you flash the wrong version (e.g., a v2.0 firmware on a v3.1 board), you may permanently brick the device. Always verify your board version visually before proceeding.
The MXQ 4K Android TV Box, powered by the Rockchip RK3229 chipset, is a popular budget streaming device. However, finding the exact firmware for the v31 hardware revision with eMCP storage can be difficult. Installing the wrong software can lead to a "bricked" device or a non-functional remote and Wi-Fi.
This guide provides the necessary information to identify your board, download the correct firmware, and flash your device safely. ⚠️ Essential Warning Flashing firmware carries risks.
Only proceed if your device is currently boot-looping or bricked. Ensure your board version matches V3.1 exactly.
Using the wrong firmware will disable the Wi-Fi chip or Remote Control. 🔍 Identifying the MXQ RK3229 eMCP V31 Board
Before searching for a link, open your device to verify the hardware. The "V31" version typically features: Chipset: Rockchip RK3229. Storage: eMCP (combined RAM and Flash memory chip).
Board ID: Often printed in white ink as MXQ-RK3229-V3.1 or R3229_V3.1. Wi-Fi Chip: Usually the RTL8189 or SV6051P. 📥 MXQ RK3229 eMCP V31 Firmware Link mxq rk3229 emcp v31 firmware link
Since firmware hosting sites change frequently, you should look for the specific image file named:MXQ_RK3229_v3.1_eMCP_Android_7.1.img (or similar). Common trusted repositories for this file include: China Gadgets Reviews: Search for "MXQ RK3229 V3.1."
4PDA Forums: The most comprehensive source for Rockchip firmware (requires translation). NeedROM: Look for the "MXQ Pro 4K Rockchip" section.
Note: Always scan downloaded .img files for malware before use. 🛠️ Tools Required for Flashing
To install the firmware, you will need the following "Rockchip Stack":
DriverAssitant: To help your PC recognize the TV box via USB.
FactoryTool or RKBatchTool: The software used to push the image to the box. If you flash the wrong version (e
USB A-to-A Cable: A male-to-male USB cable is required to connect the box to your PC. 📝 Step-by-Step Installation Guide 1. Install Drivers
Download and run Rockchip DriverAssitant. Click "Install Driver" and restart your computer. 2. Prepare the Flashing Tool
Open RKBatchTool.exe. Click the "..." button at the top right and select your downloaded .img firmware file. 3. Enter Maskrom/Recovery Mode This is the most critical step: Unplug the power from the MXQ box. Insert one end of the USB A-to-A cable into your PC.
Using a toothpick, press and hold the Reset button (located inside the AV port).
While holding the button, plug the other end of the USB cable into the USB-4 port (or the port closest to the SD slot).
If done correctly, the "1" box in RKBatchTool will turn Green or Blue. 4. Restore the Firmware Since this is a Rockchip device, you will
Click the Restore button (do not use "Upgrade" for eMCP boards). The tool will format the storage and upload the new firmware. Once the progress bar reaches 100%, the device will reboot. 💡 Troubleshooting Common Issues
Device Not Found: Try a different USB port on your PC (preferably USB 2.0) or a different cable.
Stuck at 5%: This usually indicates a power issue or a corrupted firmware file.
Remote Not Working: If the box boots but the remote fails, you likely flashed a version with a different remote.conf file. You may need to use a USB mouse to navigate.
If you can tell me the specific Wi-Fi chip model (the small square chip near the antenna) or the exact error message you are seeing, I can help you find a more specific download link. Would you like instructions on how to backup your current firmware before you flash a new one?
Since this is a Rockchip device, you will not use the common "Amlogic USB Burning Tool." Instead, you need RKDevTool (Rockchip Batch Tool).
If you're looking to find the firmware online, using specific search terms can help: