Nalco: 77352 Msds

The MSDS relies on analog data since the mixture itself may not have been fully animal-tested.

| Route | Effect | |-------|--------| | Acute oral (rat) | LD50 > 5,000 mg/kg (low toxicity) | | Acute dermal (rabbit) | LD50 > 2,000 mg/kg (mild to moderate irritant) | | Eye irritation (rabbit) | Corrosive – severe, irreversible damage | | Skin sensitization | Unlikely to cause allergic skin reaction | | Carcinogenicity | None listed (not IARC, NTP, or OSHA regulated) |

Chronic Effects: Repeated skin exposure may cause dermatitis due to defatting action. No evidence of reproductive toxicity or mutagenicity.

Story:

Tom was a water treatment plant operator responsible for ensuring the safe and efficient treatment of wastewater in his community. One day, he was tasked with handling a new chemical shipment, Nalco 77352, which was a type of water treatment polymer used to improve the clarification and dewatering of wastewater.

Before starting to work with the chemical, Tom knew he had to review the Material Safety Data Sheet (MSDS) for Nalco 77352, now known as the Safety Data Sheet (SDS). The SDS provided critical information on the chemical's composition, potential hazards, and safe handling procedures. nalco 77352 msds

The Challenge:

While reviewing the Nalco 77352 SDS, Tom noticed that the document listed several potential hazards associated with the chemical, including skin and eye irritation, respiratory problems, and environmental concerns. Tom realized that he needed to take extra precautions to ensure his safety and the safety of his colleagues when handling the chemical.

The Solution:

Tom took the following steps to ensure safe handling of Nalco 77352:

The Outcome:

By taking the time to review the Nalco 77352 SDS and following safe handling procedures, Tom and his colleagues were able to handle the chemical safely and effectively. They successfully treated the wastewater, and the community's waterways were protected from potential harm.

MSDS/SDS Information:

For reference, here is some general information about Nalco 77352:

SDS Availability:

The Nalco 77352 SDS can be obtained from the manufacturer's website (Ecolab) or by contacting their customer service department. It's essential to review the SDS regularly to ensure you have the most up-to-date information on the chemical's properties and safe handling procedures. The MSDS relies on analog data since the

| Body Part | Recommended Protection | |-----------|------------------------| | Eyes/Face | Chemical splash goggles (ANSI Z87.1) + full-face shield | | Hands | Butyl rubber, neoprene, or nitrile gloves (breakthrough time > 480 minutes for concentrated product) | | Body/Skin | Chemical-resistant apron (PVC or neoprene) and full-length pants/long sleeves | | Feet | Rubber boots or steel-toe chemical boots | | Respiratory | If mist is present: NIOSH-approved half-face respirator with P100 or N100 cartridges. In confined spaces: SCBA. |

This section of the MSDS is non-negotiable for OSHA compliance (29 CFR 1910.1200).

How to obtain the official Nalco 77352 MSDS:

Important: MSDS documents expire and are updated. OSHA requires that SDSs be no more than 5 years old, but best practice is to request a new copy annually. Always check the "Revision Date" on the first page of the SDS.

NALCO 77352 contains no substances with established OSHA PELs or ACGIH TLVs in hazardous concentrations. However, an internal Nalco occupational exposure limit for the polymer component (e.g., 10 mg/m³ as total particulate) may apply. Story: Tom was a water treatment plant operator