You have successfully installed and initially configured a Nokia 7250 IXR X1 router. This guide covered mechanical mounting, power and grounding, console access, basic network setup, and verification. For advanced features (BGP EVPN, segment routing, telemetry), refer to the Nokia 7250 IXR Configuration Guide specific to your OS version.

Always download the latest firmware from the Nokia Support Portal before deploying to production. Remember to register your device for warranty and support.

The 7250 IXR X1 has 4 fan modules. Each fan tray is hot-swappable.

SR Linux:

show system hardware fan

Expected output: oper-state = up, speed = normal.

DC Wiring:

Warning: DC installations must be performed by a qualified electrician. Do not energize until all connections are double-checked.

After installation, run this validation:

Turn on both PSU circuit breakers or plug in both AC cords.

The 7250 IXR-X1 uses a Control Management Module (CMM). Locate the management port on the CMM (often labeled MGMT or Mgmt).