Pc3000 Install -

Open Device Manager (Windows).

Step 1: Physical Hardware Installation

Step 2: Driver Installation (The Tricky Part) pc3000 install

Step 3: Software Suite Setup

Step 4: Post-Install Configuration

| Problem | Likely Cause | Solution | |---------|--------------|----------| | Dongle not detected | USB power management | Disable USB selective suspend; use powered hub | | PCIe card not seen | BIOS PCIe resource conflict | Reseat card; disable unused PCIe slots in BIOS | | Driver install fails | Secure Boot / Driver Enforcement | Disable Secure Boot in BIOS + use F8 method | | Ports test fails (no power) | Power relay not connected | Check internal power cable to PC-3000 card | | Software crashes on launch | Antivirus blocking | Exclude C:\PC3000 folder from AV scans |

A successful PC-3000 install is proven by talking to a real drive. Do not use a customer drive yet. Use a known-good test drive (old 160GB HDD). Open Device Manager (Windows)

Expected outcome:

If detection fails:

The physical PC-3000 install begins with handling the proprietary PCIe card or USB dongle (depending on your generation).