Phison Mpall V5.03.0a-dl07 May 2026
.ini file).Test Report).MPall (often written as MPALL or MP_All) is a low-level firmware flashing and manufacturing tool for USB flash drives that use Phison controllers (e.g., PS2251-xx, PS230x, PS2311 series).
Unlike standard formatting tools, MPall can:
The naming convention v5.03.0a-dl07 indicates:
White-label drive manufacturers use this to rebrand drives.
Even with Phison Mpall V5.03.0a-dl07, you may encounter errors. Here’s how to fix them: Phison Mpall V5.03.0a-dl07
| Error Code | Message | Solution |
| :--- | :--- | :--- |
| 0x01 | Device not found | Reconnect the drive; disable USB selective suspend; use a USB 2.0 hub. |
| 0x07 | Write error / Bad block | The NAND has too many bad blocks. Try a different firmware file or a lower capacity setting (e.g., convert 64GB to 32GB mode). |
| 0x12 | Firmware mismatch | You loaded the wrong .BIN file. Re-identify your controller using ChipGenius. |
| 0x28 | Load firmware error | The firmware file is corrupted. Re-extract the entire MPALL archive. |
| 0x31 | Preformat failed | The drive may be physically dying. Try a different USB port, or run the "Erase All" option in the Test tab before flashing. |
| 0x78 | Format failed | Re-run the process, but in the Partition tab, set "Format" to "No Format", then after the flash completes, use Windows Disk Management to format. |
| Feature | Details |
|---------|---------|
| Supported Controllers | Primarily PS2251-07 (aka 2307) and later variants; limited support for older 2251-03/50 |
| Firmware | dl07 suggests firmware version 07.xx.xx for 1st-gen 20nm/15nm TLC or MLC NAND |
| Mode Switching | Mode 3 (normal USB), Mode 21 (CD-ROM + USB), Mode 7 (fixed disk) |
| Preformat Option | Low-level erase before flashing |
| Bad Block Management | Scans and remaps factory-bad blocks |
| LED Control | Configurable activity/blinking patterns |
| Serial Number Generation | Random or fixed S/N |
⚠️ Warning: This is a factory tool. Incorrect settings or wrong firmware can permanently destroy the flash drive. Save parameters (
Before downloading Phison Mpall V5.03.0a-dl07, you must confirm your drive has a compatible Phison controller. Use these tools:
If your drive identifies as any PS2251, PS230X, or PS2311, then V5.03.0a-dl07 is highly likely to work.
1. Controller Support This specific version targets the PS2251 family. It offers broad support for various NAND flash types (TLC, MLC, SLC) from manufacturers like Samsung, Micron, and Toshiba. The software can auto-detect the Flash ID, which is crucial for applying the correct firmware algorithms. MPall (often written as MPALL or MP_All )
2. Bad Block Management One of the tool's most powerful features is its ability to re-scan the flash memory for bad blocks. In a repair scenario, this can mark off corrupted sectors, allowing a drive to function again (albeit usually with data loss).
3. Custom Configurations For power users, the tool allows the creation of:
If you want, I can:
(Invoking RelatedSearchTerms for people/places/names or shopping is not necessary here.)