Place the printer on a stable, non-flammable surface. Remove all foam and zip ties inside the build chamber. Ensure the print bed moves freely.
The LCD touchscreen is your command center. Pages 12–18 of the QIDI X-Pro manual cover the menu tree. Understanding this prevents accidental prints. qidi x-pro manual
Unlike basic printers, the X-Pro is feature-rich. It includes a heated chamber, a proprietary dual-extruder system, and a complex UI. Many users skip the manual and end up with clogged nozzles, layer shifts, or adhesion failures. Place the printer on a stable, non-flammable surface
Key warnings from the manual’s first pages: Where to find the official PDF: Search "QIDI
Where to find the official PDF: Search "QIDI X-Pro manual PDF" on the official QIDI Tech support page. Look for version 1.3 or higher (which includes the upgraded touchscreen UI).
The QIDI X-Pro manual dedicates 15 pages to the touchscreen interface. Here is the cheat sheet:
| Menu Item | Function | Manual’s Hidden Tip | | :--- | :--- | :--- | | Print | Select file from SD card | File names must be <20 characters; avoid special symbols. | | Level | Auto-bed leveling (with Z-probe) | Run this before every ABS print. | | Filament In/Out | Load/Unload filament | For unloading, the manual says to cut the filament flush at the extruder top before selecting "Unload" to prevent jams. | | Heat | Manual preheat | Use "Heat PLA" for loading; use "Heat ABS" to dry the chamber before printing Nylon. | | Settings | Speed, Acceleration, E-steps | Warning: Changing E-steps voids warranty unless instructed by QIDI support. |