Qidi Xplus Firmware Install — Must Try
Upgrading your QIDI X-Plus firmware is a vital step in maintaining print quality, fixing software bugs, and unlocking new features like improved Wi-Fi stability or faster print speeds. Whether you have the original X-Plus, the X-Plus 2, or the Klipper-based X-Plus 3, the installation process is straightforward if you follow the correct steps. Step 1: Download the Correct Firmware
Before starting, identify your exact printer model, as firmware for an original X-Plus will not work on an X-Plus 3.
Official Sources: Always download from the QIDI Tech Software & Firmware page or their GitHub repository to ensure you have the latest stable release.
Version Check: On your printer’s touchscreen, go to Settings > About to see your current version. Step 2: Prepare Your USB Drive
The QIDI X-Plus can be picky about USB drives. For the best results:
Size Matters: Use a USB drive that is 8GB or smaller. Users have reported that drives larger than 16GB often fail to be recognized during the boot sequence. Format: Ensure the drive is formatted to FAT32.
File Placement: Extract the downloaded .zip or .rar file. You will typically see a folder named QD_Update. Copy this folder directly to the root directory (the main page) of your USB drive. Do not place it inside another folder. Step 3: Installation Methods Method A: The "About" Menu (Recommended for X-Plus 3)
Turn on your printer and insert the prepared USB drive into the front port. qidi xplus firmware install
Navigate to the "Suitcase" icon (Settings) and then tap the "About" icon.
Look for an "Update" button or a notification in the lower-left corner that says "Updating in progress".
Wait: The process can take 15–30 minutes. Do not turn off the machine until it prompts you to restart or restarts automatically. Method B: Boot-Time Update (Standard for X-Plus/X-Plus 2) Qidi x-plus 3 firmware upgrade guide - Facebook
Here’s a step-by-step guide for installing firmware on a QIDI X-Plus (assuming you meant X-Plus, as “X-Plus” is the correct model; “Xplus” is a common shorthand).
After a firmware update, your settings are often reset to default.
There are two ways to get firmware: the official route (stable) and the community route (feature-rich).
It is good practice to "Reset to Factory Settings" after a firmware update to ensure old settings do not conflict with new code. Upgrading your QIDI X-Plus firmware is a vital
Warning: flashing firmware can void warranty or brick the printer. Proceed at your own risk.
If you want, I can:
(Note: you didn't specify whether you want the official or aftermarket firmware; I assumed official. If you want Marlin or custom builds, say so.)
Complete Guide to QIDI X-Plus Series Firmware Installation Updating your QIDI X-Plus series firmware is essential for maintaining printer stability, improving temperature control, and unlocking new features like improved material handling. Whether you are using the classic X-Plus, the X-Plus 3, or the newer X-Plus 4, this guide provides a comprehensive walkthrough for a successful installation. Before You Begin: Critical Warnings
Official Sources Only: Never update Klipper or other components through the Fluidd or Mainsail web interfaces. QIDI uses a customized "dirty" fork of Klipper; updating via standard repositories can brick your machine.
Backup Your Config: Before starting, it is highly recommended to back up your printer.cfg and moonraker.conf files through the web interface.
Power Stability: Ensure your printer is connected to a stable power source. A power failure during a firmware write can result in a corrupted EMMC. Step 1: Downloading the Correct Firmware After a firmware update, your settings are often
Identify your specific model to download the matching firmware package from official repositories:
QIDI X-Plus 3: Download the latest .rar or .zip package from the QIDI X-Plus 3 GitHub or the QIDI Tech US Store.
QIDI X-Plus 4: Newer versions (V1.4.0+) support online updates, but offline files are available on the QIDI X-Plus 4 GitHub.
Legacy X-Plus: Visit the QIDI Support Page for older model files. Step 2: Preparing the USB Drive 3DPrinter Software & Firmware - QIDI Tech
Before diving into the installation, let’s discuss the "why." The QIDI X-Plus runs on a modified Marlin firmware. Updates usually address three critical areas:
A word of caution: Do not update just for the sake of it. If your X-Plus is printing perfectly, read the changelog first. Only proceed if the update fixes a specific issue you are encountering.