Radio Set Hx Prc 6020 Technical Data Install May 2026

| Symptom | Likely Cause | Fix | |---------|--------------|-----| | No power | Dead battery / blown vehicle fuse | Replace battery; check 15 A fuse | | Low Rx volume | Handset volume low | Adjust knob on handset side | | Cannot Tx | PTT cable defect / high SWR | Check antenna connection; SWR meter | | Programming fails | Wrong COM port | Update driver; use USB 2.0 port | | Overheating in vehicle | Amplifier lacks airflow | Reposition away from engine heat |

⚠️ Note: The HX PRC 6020 is a simulated model for this feature. For actual equipment, always refer to the original manufacturer’s installation manual, safety instructions, and regulatory compliance (FCC/CE/MIL).

The Radio Set HX PRC-6020 (often part of the Tadiran HF-6000 family) is a high-performance, combat-proven HF manpack designed for secure voice and high-speed data communications in the modern battlefield. Engineered for flexibility, it serves as the core of several configurations, including vehicular (VRC-6020) and fixed station (GRC-6400) setups. Technical Data & Specifications

The HX PRC-6020 is designed to operate in the High Frequency (HF) band, providing long-range communication beyond the line of sight via skywave propagation. Frequency Range: 1.5 MHz to 29.9999 MHz.

Channel Spacing: 100 Hz standard (optionally as fine as 10 Hz for 2.8 million total channels). Presets: 100 programmable channels. Modulation Modes: USB, LSB, AM, and CW (Telegraphy).

Power Output: Selectable at 5W, 10W, or 20W for the manpack version. In vehicular configurations, power can be amplified up to 100W or 400W.

Data Rates: Supports adaptive data transmission up to 4800 bit/s. Special Features:

ALE (Automatic Link Establishment): Compliant with military standards to automatically find the best clear channel.

ECCM: Advanced frequency hopping to resist jamming and interception.

Selective Calling: Allows communication with specific individual stations or designated groups.

Built-in Test (BIT): Comprehensive internal monitoring that can be operator-initiated down to the module level. Installation Guide

The HX PRC-6020 is a modular system that can be deployed in three primary ways: manpack, vehicular, or fixed-site. 1. Manpack Configuration (PRC) The most common setup for dismounted soldiers.

Battery Attachment: Secure the 12V Lithium Sulphur dioxide (LiSO2) battery pack (e.g., BEL 12V 15Ah) to the base of the transceiver using the captive screw hooks.

Antenna Setup: Connect a whip antenna for on-the-move operations or a dipole/long-wire antenna for stationary use via the BNC or specialized antenna connectors.

Audio Gear: Attach the H-250 type handset to the front-panel connector. 2. Vehicular Installation (VRC-6020) This setup converts the manpack into a mobile station. radio set hx prc 6020 technical data install

Mounting: Install the radio into a shock-absorbent vehicular mount (jerk-and-run cradle).

Power Connection: Interface with the vehicle's 24V DC system using a power adapter/amplifier that steps down or regulates power for the transceiver.

Antenna Tuner: Typically requires an external Automatic Antenna Tuner (AAT) to match the radio to vehicle-mounted whip antennas. 3. Fixed Station Setup (GRC) For permanent or temporary command centers.

Power: Uses a mains supply charger capable of 230V AC (50Hz) to keep batteries topped off or to power the unit directly.

Antenna: Often utilizes a high-gain broadband dipole or NVIS (Near Vertical Incidence Skywave) antenna for reliable regional communications. Maintenance & Power Management

The system's longevity relies on proper battery care and environmental protection.

Charging: Batteries can be charged via a solar charger (60W peak) or a mains supply charger that supports dual-battery fast charging.

Zeroization: In case of potential capture, use the emergency "Zeroize" button or deletion command to erase all sensitive cryptographic keys and presets. PRC-6020 Radio Set Technical Overview | PDF - Scribd

Technical Data:

Installation:

The AN/PRC-6020 radio set is designed to be a portable, tactical communication system. The installation process typically involves:

Key Features:

Operating Instructions:

The AN/PRC-6020 radio set is typically operated in a push-to-talk (PTT) mode, where the user presses a button on the microphone to transmit and releases it to receive. The radio set can be used in a variety of modes, including: | Symptom | Likely Cause | Fix |

Maintenance and Troubleshooting:

The AN/PRC-6020 radio set requires regular maintenance to ensure optimal performance. This includes:

Keep in mind that the AN/PRC-6020 is a military communication device, and technical data and documentation may be limited or restricted due to security concerns. The information provided here is based on publicly available sources and may not reflect the most up-to-date or accurate information.

HX PRC-6020 (often part of the Tadiran HF-6000 family) is a high-frequency (HF) man-pack radio designed for tactical, multi-adaptive military communication. It is optimized for reliable voice and data transmission in harsh or jammed environments. ⚙️ Technical Specifications

The PRC-6020 provides robust long-range communication via the HF band: Frequency Range: 1.5 MHz to 29.9999 MHz.

2,850,000 channels with 10 Hz spacing (Standard: 285,000 channels at 100 Hz). Stores up to 100 preset channel parameters. Power Output: Selectable levels of 5W, 10W, or 20W Modulation: Supports USB, LSB, and AM modes. Receiver Sensitivity: -110 dBm (for 10 dB SINAD). Data Rates: Built-in modems support rates up to (standard) or higher with specialized waveforms. Environmental: Operational from -40°C to +65°C ; compliant with MIL-STD-810 E/F. 🛠️ Installation & Configuration

The PRC-6020 is designed for modular deployment across different platforms: 🎒 Man-pack (Portable) Power Source: Typically powered by a 12V, 15Ah LiSO2 (Lithium Sulphur Dioxide) battery pack.

Uses proprietary man-pack whip antennas or specialized NVIS (Near Vertical Incidence Skywave) antennas for tactical range. 🚜 Vehicular (VRC-6020) Configuration:

The man-pack unit slides into a vehicular mounting tray/amplifier adapter.

Draws from the vehicle's 24V DC supply (often with a 230V AC option for base stations). Amplification:

Can be boosted to higher power (up to 125W or 400W) when used in VRC-6200 or GRC-6400 configurations. 🛡️ Key Features & Modes Frequency-hopping capability to prevent jamming. Integrated digital encryption for secure voice and data. ALE (Automatic Link Establishment):

Supports MIL-STD-188-141A for automatic best-frequency selection. Built-in Test (BIT):

On-line and operator-initiated diagnostics down to the module level. Selective Calling: Address individual stations, groups, or the entire network. If you'd like, I can help you: pinout diagrams for the vehicle mounting kit. maintenance schedule based on MIL-STD guidelines. Compare this model with newer Software Defined Radios (SDR) What part of the installation process are you working on right now? PRC-6020 Radio Set Technical Overview | PDF - Scribd

Radio Set HX PRC 6020 Technical Data and Installation Guide ⚠️ Note : The HX PRC 6020 is

Introduction

The Radio Set HX PRC 6020 is a high-frequency (HF) radio communication system designed for tactical and strategic communication applications. This document provides technical data and installation guidelines for the Radio Set HX PRC 6020.

Technical Data

The Radio Set HX PRC 6020 is a modular, multi-mode radio system that operates in the HF frequency band (2-30 MHz). The system consists of several components, including:

Technical Specifications

The following technical specifications apply to the Radio Set HX PRC 6020:

Installation Guidelines

The Radio Set HX PRC 6020 is designed to be installed in a variety of platforms, including vehicles, shelters, and fixed sites. The following installation guidelines should be followed:

Installation Steps

The following steps should be followed during installation:

Conclusion

The Radio Set HX PRC 6020 is a versatile and reliable HF radio communication system designed for tactical and strategic communication applications. By following the technical data and installation guidelines outlined in this document, users can ensure proper installation and operation of the system.

References

The HX PRC 6020 is a 20-watt HF man-pack radio system from the Tadiran HF-6000 series, designed for secure voice and data communication, featuring 1.5 to 29.9999 MHz operating range, ALE, and MIL-STD-810 compliance. The system is installed via a quick-release battery connector and supports various whip or dipole antennas, configurable for man-pack, vehicular, or fixed stations. For more details, visit Elbit Systems UK. Tadiran HF-6000 - Elbit Systems UK

| Interface | Type | Function | |-----------|------|----------| | Antenna | BNC or TNC (50 Ω) | RF input/output | | Audio/Data | 7-pin NATO circular (male) | Handset, headset, data terminal | | Power | 2-pin locking Lemo | DC input (vehicle adapter) | | Programming | USB-C or RS-232 (under cover) | Firmware & channel loading | | External Speaker | 3.5 mm mono jack | Loudspeaker (8 Ω min) |

| Parameter | Specification | |-----------|----------------| | Frequency Range | VHF: 136–174 MHz
UHF: 400–470 MHz (or 350–390 MHz for some models) | | Channel Capacity | 256 channels / 16 zones | | Operating Voltage | 7.4 V DC (nominal, Li-ion battery) | | Battery Life | Approx. 12–16 hours (1500–2000 mAh, depending on version) | | RF Output Power | High: 5 W (VHF) / 4 W (UHF)
Low: 1 W | | Receiver Sensitivity | 0.25 µV (12 dB SINAD) | | Audio Output | 1 W @ 8 ohms | | IP Rating | IP67 (submersible 1 m for 30 min) | | Dimensions | ~125 × 60 × 38 mm (without antenna) | | Weight | ~320 g (with battery) | | Modulation | FM / 4FSK (digital mode if DMR variant) | | Antenna Connector | SMA-Female (or NATO-standard bayonet depending on clone version) |