Shell Alvania R3 Grease Datasheet Extra Quality

Below is the comprehensive technical data extracted from Shell’s internal quality specifications for the Extra Quality tier. Use this as your reference standard.

Shell Alvania R3 (currently marketed as Shell Gadus S2 V100 3 Go to product viewer dialog for this item.

) is a high-performance, medium-to-hard industrial grease designed for applications where high operating speeds and reliability are critical. It is a lithium hydroxystearate soap-based grease formulated with highly refined mineral oils and advanced additives for oxidation, wear, and rust protection. Technical Specifications According to the Shell Alvania RL 3 datasheet from Lubesta Shell Gadus S2 V100 3 technical data sheet , the typical characteristics are: Test Method NLGI Consistency 3 (Medium/Hard) Lithium hydroxystearate Base Oil Type Mineral oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point 180°C to 190°C ASTM D396 / IP 132 Operating Temperature Range -30°C to +135°C Key Features and Benefits High-Speed Performance

: Specifically optimized for bearings operating at their maximum rated speeds within the stated temperature range. Oxidation and Mechanical Stability

: Resists the formation of deposits caused by oxidation at high temperatures and maintains consistency under mechanical stress to prevent leakage. Corrosion Protection

: Contains specific inhibitors to provide effective protection in hostile environments. Extended Service Life

: Formulated with non-crystalline additives that meet low-noise bearing requirements, extending the life of the equipment. Typical Applications Electric Motor Bearings

: Particularly recommended for industrial electric motors where low noise and high performance are required. Rolling and Plain Bearings

: Suitable for general industrial lubrication of various bearing types. Sealed-for-Life Bearings

: Often used in factory-fill applications by bearing manufacturers. Water Pump Bearings

Shell Alvania Grease R3 (now rebranded as Shell Gadus S2 V100 3

) is a high-performance, medium/hard multipurpose industrial grease designed for the lubrication of rolling element and plain bearings. Lube finder Technical Data Summary

The following characteristics are typical for current production of this lithium hydroxystearate-based grease: Test Method Typical Value NLGI Consistency Lithium hydroxystearate Base Oil Type Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point Operating Temperature Range -35°C to +135°C Key Performance Features Reliable High-Temperature Performance

: Operates effectively up to +135°C, providing protection even at high rated speeds. Oxidation and Mechanical Stability

: Fortified with additives to resist the formation of deposits and maintain consistency under vibration. Corrosion Resistance shell alvania r3 grease datasheet extra quality

: Offers effective protection in hostile environments and presence of moisture. Long Storage Life

: Designed to maintain its consistency during prolonged storage periods. Main Applications Electric Motor Bearings

: Specifically recommended for high-performance lubrication in electrical motors. Rolling and Plain Bearings

: Suitable for a wide range of industrial bearings operating at their maximum recommended temperatures. Sealed-for-Life Bearings

: Often used in applications where re-greasing is infrequent. Water Pump Bearings : Performs reliably in the presence of water. Shell Iraq Safety and Handling Shell Alvania R3

is unlikely to present significant health hazards when used as recommended and with good personal hygiene

. It contains highly-refined mineral oils and is not classified as flammable but will burn. Shell Iraq local supplier for this grease or its modern equivalent, Shell Gadus S2 V100 3 Shell Alvania Grease R Series Overview | PDF - Scribd

When you open the Shell Alvania R3 grease datasheet extra quality, focus on these three parameters:

Use the datasheet’s relubrication interval formula:
Interval (hours) = 14,000 / (n × d^0.5) – where n = RPM, d = bearing bore (mm). For Alvania R3 at 1000 RPM, 50mm bore: interval ≈ 200 hours.

Using the RPVOT method (ASTM D2272), Extra Quality batches recorded pressure drop times exceeding 180 minutes at 150°C, compared to 140 minutes for standard. This means:

As a lithium-based grease, Shell Alvania R3 is generally compatible with other conventional lithium greases. However, mixing different grease types should be avoided to ensure the "extra quality" performance is not compromised.

| Property | Value (Extra Quality) | Test Method | | :--- | :--- | :--- | | NLGI Grade | 3 | ASTM D217 | | Worked Penetration (60 strokes) | 220 – 250 (typically 235) | ASTM D217 | | Unworked Penetration | 230 – 260 | ASTM D217 | | Drop Point | >185°C (365°F) | ASTM D566 | | Base Oil Viscosity @ 40°C | 100 – 110 cSt | ASTM D445 | | Base Oil Viscosity @ 100°C | 11 – 12 cSt | ASTM D445 | | Viscosity Index | Min 95 | ASTM D2270 | | Color | Light brown / Amber | Visual | | Texture | Smooth, buttery | — |

Choose this grease if you need:

Avoid if: Ambient temperatures fall below -20°C (use Alvania R2 or a synthetic grease for cold starts) or if speeds exceed 10,000 rpm (lighter NLGI 1.5 or 2 required). Below is the comprehensive technical data extracted from

This piece is for informational purposes. Always verify with the official Shell Alvania R3 product datasheet before critical deployment.

Shell Alvania R3 (now officially replaced by Shell Gadus S2 V100 3) is a high-performance, medium/hard industrial grease designed for the lubrication of rolling element and plain bearings. It is particularly recognized for its stability in electric motor bearings and high-speed applications. Technical Datasheet: Typical Properties

The following data represents the typical physical characteristics for Shell Alvania R3 (and its modern equivalent, Shell Gadus S2 V100 3): Test Method Typical Value NLGI Consistency 3 (Medium/Hard) Soap Type Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration, Worked @ 25°C 220–250 (0.1 mm) Dropping Point 180°C – 190°C Operating Temperature Range -30°C to +130°C Core Performance Features

Reliable High-Temperature Performance: Resists the formation of deposits caused by oxidation, extending bearing life in environments reaching up to +130°C.

Exceptional Mechanical Stability: Maintains its consistency even under severe vibrations and shock loads, preventing leakage and ensuring constant lubrication.

Corrosion Protection: Provides a robust barrier against rust and corrosion, even in hostile or moist environments. Extended Storage Life: Unlike some budget lubricants, Alvania R3

does not alter in consistency during prolonged storage, making it ideal for maintenance inventories. Key Applications Shell Alvania R3

is recommended by manufacturers for several critical industrial components:

Electric Motors: Specifically formulated for the high-speed requirements of electric motor bearings.

Water Pumps: Frequently utilized in pump bearings where water resistance and high-temperature stability are vital.

Sealed-for-Life Bearings: Its long-term stability makes it a "fit and forget" solution for various sealed bearing types.

Large Bearings: Suitable for bearings with a bore size over 75mm. Important Compatibility Note If you are searching for Shell Alvania R3

for older machinery, note that Shell has consolidated its product lines. The Shell Gadus S2 V100 3 is the direct modern replacement, maintaining the same lithium hydroxystearate chemistry and NLGI 3 consistency. Shell Alvania Grease R Series Overview | PDF - Scribd

Shell Alvania R3 (now rebranded and updated as Shell Gadus S2 V100 3 When you open the Shell Alvania R3 grease

) is a high-performance, multipurpose industrial grease designed for the lubrication of rolling element bearings. It is a medium/hard lithium-based grease formulated with highly refined mineral oils and specialized additives to prevent oxidation, wear, and rust. Technical Specifications

The following data reflects the typical physical characteristics for the R3 (NLGI 3) grade: Typical Value NLGI Consistency Lithium Hydroxystearate Base Oil Type Mineral Oil Kinematic Viscosity @ 40°C Kinematic Viscosity @ 100°C Cone Penetration (Worked @ 25°C) 220–250 (0.1 mm) Dropping Point Operating Temperature Range -30°C to +130°C Key Performance Features Reliable High-Temperature Performance:

Maintains stable lubrication in bearings operating at temperatures up to +130°C, extending bearing life. Oxidation & Mechanical Stability:

Resists the formation of deposits caused by oxidation at high temperatures and maintains consistency under vibration. Corrosion Resistance:

Specially formulated to protect bearing surfaces against rust, even in humid environments. Long Storage Life:

Consistency and performance remain stable during prolonged storage. Primary Applications Electric Motor Bearings:

Particularly recommended for high-speed industrial electric motors. Rolling Element Bearings:

Suitable for a wide range of general industrial applications. High-Speed Bearings:

Optimized for bearings operating at their maximum rated speeds where a firmer grease (NLGI 3) is required to prevent leakage. Shell Product Catalogue Portal Safety & Environmental Handling

Unlikely to present hazards when used correctly. Avoid skin contact and use impervious gloves. Environment:

Do not discharge into drains, soil, or water. Dispose of used grease at authorized collection points. Composition:

Contains highly refined mineral oils (<3% DMSO extract) and specific additives like sodium nitrite and N-1-naphthylaniline. For current safety documentation, you can search for the Shell Material Safety Data Sheet (MSDS) using the product code or name. or see a list of compatible alternatives from other brands? Shell Alvania Grease R Series Overview | PDF - Scribd

Note: This is NOT an NSF H1 food-grade grease. For food processing, refer to Shell Gadus S2 V220 series.