Finding a stevens model 94 parts diagram new is only half the battle. You need to use it correctly.
To identify a missing or broken part, follow this sequence:
Safety note: The Stevens 94 has no manual safety. Always verify empty chamber before disassembly.
Below is an exploded-view reference. Think of the rifle lying on its side, lever down. stevens model 94 parts diagram new
[Front Sight]----[Barrel]----[Rear Sight]----[Receiver Top Tang]
| |
[Forearm] [Breech Block (Falling Block)]
| |
[Forearm Screw] [Extractor]
| |
[Magazine Tube (Optional on some .22 models)]
|
[Lever Pivot Screw]----[Operating Lever]
|
[Lever Spring]
|
[Buttplate]----[Stock]----[Lower Tang]----[Trigger Guard]----[Trigger]
|
[Trigger Spring/Screw]
|
[Mainspring Housing]
|
[Hammer (Internal)]
Once you have your diagram, here is the workflow:
Step 1: Identify the Exact Variant A diagram for a 1940s Model 94 may not fit a 1970s Model 94C. Look for a letter suffix after the serial number or on the barrel stamp.
Step 2: Match the Part Number Let’s say your firing pin is broken. On the Numrich diagram, it might be labeled Part #42. Note the OEM part number (e.g., “S-94042”). Finding a stevens model 94 parts diagram new
Step 3: Search for “New Old Stock” or Reproduction Type that part number into eBay, GunBroker, or Numrich. Because the Stevens 94 is so common, many parts are still available as new-old-stock (unused original factory parts). Companies like Wisner’s also make reproduction firing pins and extractors.
Step 4: Verify Fitment with Your Diagram Before buying, compare the part in the seller’s photo to your new parts diagram. Pay attention to:
Using your diagram, you can diagnose issues quickly: Safety note: The Stevens 94 has no manual safety
| Symptom | Likely Culprit (from diagram) | Fix | | :--- | :--- | :--- | | Gun fires when closing the action | Worn sear (Part #15) or hammer notch | Replace sear; if notch is worn, replace hammer too. | | Failure to extract | Broken extractor spring (#3) or worn extractor claw (#2) | Replace extractor and spring. | | Weak hammer strike | Broken mainspring (#14) | Replace hammer spring. | | Barrel pops open on firing | Worn top lever spring (#8) or hinge pin (#9) | Replace spring; if pin is ovaled, replace pin and ream receiver. | | Trigger won’t reset | Broken trigger spring (#12) or debris in trigger plate | Deep clean; replace spring. |
Look at your barrel stampings. Does it say “Stevens Model 94B” or “94C”? Search for that specific diagram. A 94C diagram shows a different extractor shape than a 94B.
Once you’ve used the diagram to rebuild your shotgun, protect your investment: