Thyssenkrupp Levant Stair Lift Installation Manual Full May 2026

The manual mandates that the technician complete:

The final section covers the "Power On" sequence.

The Levant’s Achilles’ heel is the battery management system. The installation manual dedicates an entire chapter (Chapter 9) to this.

Warning from page 72: Do not replace individual NiMH cells. Replace the entire battery pack. Mixing old and new cells causes thermal runaway. thyssenkrupp levant stair lift installation manual full

If you're looking for general information or troubleshooting tips, here are some additional resources:

The installation process for the Thyssenkrupp Levant (often marketed interchangeably with the

) involves a rack-and-pinion system designed for straight staircases. While the full technical installation manual is typically reserved for certified technicians, the core assembly steps are outlined below based on available technical documentation. U.S. Food and Drug Administration (.gov) Core Installation Steps Rail Assembly The manual mandates that the technician complete: The

: The aluminium rail is fixed directly to the stairs (not the wall) using support legs. The rack must be clear of any obstructions before mounting. Drive Unit Placement

: The motor/drive unit is slid onto the rail. Ensure the rack-and-pinion teeth are correctly engaged. Charging Contacts

: Install charging contacts at the top and bottom of the rail. These must be aligned so the drive unit’s spring contacts touch them when parked. Power Supply The Levant’s Achilles’ heel is the battery management

: Connect the transformer (typically 27V AC or 33V DC depending on the regional model) to a standard wall socket and then to the rail’s charging contacts. Chair Mounting

: Secure the folding seat, backrest, and armrests onto the drive unit. Control Configuration

: Sync the wireless call-and-send stations and verify the wired joystick in the armrest is functional. Key Components Levant stairlift User Manual