Tronxy Xy-2 Pro Firmware Update -

This uses the "Copy to SD card, insert, power on" method.

Step 1: Format your SD Card

Step 2: Source the correct firmware

Step 3: The Flash Process

How to verify success: Go to Menu > Info. The firmware date should be newer. tronxy xy-2 pro firmware update

These boards use a bootloader via Arduino or a programmer. This is advanced.

If you prefer a text-based sequence:

Pre-update checklist:

Process:

This is the most critical section of this article. If you flash the wrong firmware, you will brick your printer.

Tronxy has silently revised the XY-2 Pro several times. There are currently three major hardware variants. You must open the electronics case (the box underneath the build plate) and visually inspect the motherboard. This uses the "Copy to SD card, insert, power on" method