The identifiers "VID 1E3D" and "PID 198A" are USB Vendor ID (VID) and Product ID (PID) values used by an operating system to recognize a specific USB device. Together they uniquely identify the manufacturer (VID) and the product model (PID) so the OS can load the correct driver or take an appropriate action.
If you suspect a counterfeit drive, do not store important data on it. You may use the MP Tool to “downsize” the capacity to the true NAND size.
If you have landed on this page, you are likely staring at your computer’s Device Manager, a cryptic error message, or a driver update tool that has flagged a piece of hardware with the identifier VID_1E3D&PID_198A. This alphanumeric string looks intimidating, but it is simply the "fingerprint" of a specific USB device.
In the world of USB hardware, every device contains two critical identifiers:
In this article, we will break down exactly what device uses VID 1E3D PID 198A, why it appears on your system, how to find drivers, troubleshoot common errors, and differentiate between a working device and a hardware failure.
Sites like Driver Identifier or Snappy Driver Installer (SDI) may list a package for 1E3D:198A. Only download from trustworthy sources – free driver download sites are often malware traps. The safest third-party option is to install the Chipsailing official driver package (if available) from a hardware database like LaptopVideo2Go or Station-Drivers.
Struggling with an unknown USB device? Here is everything you need to know about the hardware with Vendor ID 1E3D and Product ID 198A.
If you have opened your Windows Device Manager, Linux lsusb output, or a USB diagnostic tool and stumbled upon the cryptic string "VID_1E3D&PID_198A," you are likely dealing with an unrecognized, malfunctioning, or driverless piece of hardware.
This identifier does not correspond to mainstream consumer gadgets like a standard mouse, keyboard, or flash drive. Instead, it points to a specific, specialized chipset. In this 2,500-word deep dive, we will uncover exactly what device uses this ID, why it may not be working, how to fix driver errors, and advanced troubleshooting steps for Windows, Linux, and macOS.
The USB Device ID VID 1E3D PID 198A identifies a mass storage device manufactured by Chipsbank Microelectronics Co., Ltd
. This specific hardware signature is most commonly associated with generic flash drives, USB sticks, and some counterfeit storage media. Device Specifications Vendor ID (VID): (Chipsbank Microelectronics Co., Ltd.). Product ID (PID): (Flash Disk / USB Mass Storage Device). Controller Part-Number: Often uses the controller. Typically USB 2.0 (High Speed). Power Consumption: Standard maximum current of 100mA. Common Use Cases and Issues
Devices with this ID are frequently found in "white-label" or unbranded USB drives. Because Chipsbank controllers are often used in low-cost or faked-capacity storage, users may encounter specific issues: Fake Capacity:
This ID is sometimes found in "16TB" or other high-capacity drives sold at suspiciously low prices. These drives often use software to report a large size while only containing a few gigabytes of actual NAND flash. "No Media" Errors:
A common failure state for this controller is appearing as "No Media" with 0 bytes of capacity in disk management tools. Data Recovery: Specialized tools like ChipsGenius
are used to identify the specific controller version (e.g., CBM2199E) for repair or recovery purposes. Super User Driver and Maintenance Information Usb Device Id Vid 1e3d Pid 198a
Standard USB mass storage drivers included in Windows, macOS, and Linux usually support this device automatically. If the device is not recognized, you can manually verify its ID using: How do I check the PID and VID of my USB device?
Here’s a structured draft based on your query, written as if for a technical note, support article, or database entry.
Title: USB Device Identifier: VID 1E3D, PID 198A
Vendor ID (VID): 1E3D
Product ID (PID): 198A
Vendor: Chipsbank Microelectronics Co., Ltd. (commonly associated with USB flash drive controllers)
Possible Device: USB flash drive / storage device (often used in unbranded or OEM USB sticks)
Common driver:
Known issues / notes:
Suggested action if the device isn’t working properly:
USB Device VID 1e3d PID 198a identifies a mass storage device manufactured by Chipsbank Microelectronics Co., Ltd.. This specific combination is widely associated with budget USB flash drives, card readers, and promotional thumb drives utilizing Chipsbank controller chips (such as the CBM2099E, CBM209XE, or CBM2199S).
Below is a technical reference sheet and troubleshooting guide generated for this specific hardware profile. 🏷️ Device Identification
Vendor ID (VID): 1E3D (Chipsbank Microelectronics Co., Ltd.)
Product ID (PID): 198A (Commonly assigned to Flash Disks and Flash Readers) Device Type: USB 2.0 Mass Storage Device Common Controllers: CBM2098, CBM2099E, CBM2199S 🛠️ Common Use Cases & Behavior
Devices with this hardware ID are often white-label, generic, or promotional USB drives. The identifiers "VID 1E3D" and "PID 198A" are
Read/Write Speeds: They typically operate at standard USB 2.0 High-Speed specifications.
Architecture: Many of these devices use "Tandem" or "UDP" chip structures where the controller and NAND flash memory are bound together in a single package to reduce manufacturing costs. ⚠️ Known Issues and Technical Support
Because Chipsbank controllers are highly prevalent in low-cost and sometimes counterfeit high-capacity drives (e.g., drives spoofed to report fake capacities like "2TB"), they frequently encounter specific failure states: 1. Drive is Read-Only or Write-Protected
Cause: The controller has locked the NAND flash memory to protect existing data after detecting too many bad blocks or a physical voltage drop.
Solution: Standard Windows formatting or diskpart will usually fail. You will need a low-level proprietary mass production tool (MPTool) specific to the Chipsbank controller. 2. "Device Cannot Start (Code 10)" or Unrecognized Device Cause: Corrupted controller firmware or hardware failure.
Solution: Try shifting the drive to a rear motherboard USB port. If it still fails to read, the device may need to be put into "Test Mode" by manually shorting specific pins on the controller circuit board. 💾 Firmware & Recovery Tools
To repair, low-level format, or restore a corrupted flash drive with this VID/PID, technicians utilize specialized software.
[!IMPORTANT]Using mass production tools will completely erase all data on the drive. Use these only if you are trying to salvage the physical drive, not the data on it.
ChipGenius: Download this free utility first to query the drive. It will read the internal registers and tell you the exact Chipsbank controller part number (e.g., CBM2099E).
Chipsbank APTool / UMPTool: These are the official factory software suites used to flash firmware and map bad sectors on Chipsbank chips. You must match the version of APTool/UMPTool to the exact controller model identified by ChipGenius. Resources for these files can be reliably searched on specialized databases like USBDev or FlashBoot.
Are you attempting to recover lost data from this drive, or are you trying to repair a corrupted drive so it can be used again? Chipsbank Microelectronics Co. Ltd - USBDev.ru
The USB Device ID VID 1E3D and PID 198A identifies a Flash Disk manufactured by Chipsbank Microelectronics Co., Ltd.. This specific identifier is commonly associated with generic or OEM USB 2.0 flash drives and card readers. Key Specifications
Vendor ID (VID) 1E3D: Registered to Chipsbank Microelectronics Co., Ltd., a Chinese semiconductor company specializing in flash memory controllers.
Product ID (PID) 198A: Generally identifies the device as a "Flash Disk" or "HighSpeed" mass storage device. In this article, we will break down exactly
Controller Model: Often utilizes the Chipsbank CBM2199S controller. Protocol: USB 2.0 High Speed.
Reported Capacities: Users have logged various sizes for this specific ID, ranging from small 8GB drives to large 250GB+ models, indicating it is a widely used generic controller for different memory capacities. Common Uses & Troubleshooting
Generic Branding: You will find this ID in many unbranded or "white-label" USB drives, including those from brands like Lenovo (OEM) or promotional "free" thumb drives.
Driver Support: These devices typically use the standard USB Mass Storage Class driver included with Windows, macOS, and Linux.
Repair Tools: If the drive becomes corrupted (e.g., shows "No Media"), specialized low-level formatting tools from Chipsbank (CBM) are often used by technicians to "revive" the firmware. How to Verify Your Device
If you are troubleshooting a device and want to confirm it matches these IDs:
USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft
USB Device ID Vid 1e3d Pid 198a refers to a generic flash drive powered by a Chipsbank Microelectronics controller. DeviceHunt Here is the "story" of this device: The Manufacturer The Vendor ID (VID) belongs to Chipsbank Microelectronics Co., Ltd.
, a semiconductor company based in Shenzhen, China. They specialize in low-cost flash memory controllers, which are the "brains" of a USB drive that manage how data is stored and retrieved. The Device Identity Product ID (PID) 198A : This specific ID is typically assigned to their "HighSpeed" or generic "Flash Disk" Common Use
: Because Chipsbank controllers are affordable and mass-produced, they are often found in "unbranded" or promotional USB sticks—the kind you might get for free at a conference or buy in bulk from online marketplaces. DeviceHunt Performance and Behavior
: These devices are usually USB 2.0. While they identify as "HighSpeed," they are built for utility rather than performance. Troubleshooting
: If your computer sees this specific ID but cannot access the files, it often means the controller is working, but the actual memory chip (NAND) inside has failed or become corrupted. Reputation
: In tech circles, Chipsbank devices are sometimes associated with "fake capacity" drives—cheap sticks programmed to report more storage than they actually have—though this ID is also used for many legitimate, small-capacity budget drives. How to Check It
If you see this ID on your system, you can verify it through: Device Manager > Right-click device > Properties > Details > Hardware IDs. : Run the command in the terminal. : System Report > Hardware > USB. recovery tools for this specific controller or trying to verify the capacity of a drive you just bought?
USB Flash Drive Speed Tests - VID = 1e3d, PID = 198a - NirSoft