Cause: The audio stream is tied to the video stream, but Windows defaults to a different audio input. Fix:

Windows 10 64-bit (x64) introduced strict Driver Signature Enforcement (DSE). This security feature blocks any driver that isn’t digitally signed by Microsoft.

The original EasyCAP drivers were released for Windows XP and Vista (32-bit). These drivers:

When you plug in the device, Windows might see "Unknown Device" or "USB 2860 Device," but it will fail to load the driver, displaying a Code 52 error: "Windows cannot verify the digital signature for this driver."

You need either:

Buy it only if:

Avoid it if:

Summary: The EasyCap SM-USB-007 is a relic of a bygone era. On Windows 10 x64, it is a "hacker's toy"—it requires tinkering to work, but once it does, it gets the job done for basic video archiving.

Getting the EasyCap SM-USB 007 (often recognized as the SMI Grabber Device ) to work on Windows 10 x64

can be tricky because the hardware is older and official support is limited. Here is a comprehensive guide to installing the drivers and getting your video capture running. 1. Identify Your Hardware

Before installing anything, verify that your device has the correct Hardware ID Device Manager by right-clicking the Start button. Look for an unknown device labeled SM-USB 007 Right-click it, select Properties , go to the tab, and select Hardware Ids from the dropdown. Check if it is recognized as USB\VID_1B71&PID_3002 or similar common IDs for this SMI chipset. 2. Recommended Driver Installation

The most reliable drivers for Windows 10 x64 are often the legacy Windows 7 64-bit drivers. Manual Install Method

Download a trusted driver package, such as the one found on the Samuel Carreira GitHub repository Driver Scape Extract the ZIP file to a folder. Device Manager , right-click SM-USB 007 and select Update Driver Browse my computer for drivers and navigate to the extracted folder (select the Alternatively, you can right-click the file (e.g., SmiUsbGrabber3C.inf ) and select : Once installed, the device should appear under Sound, video and game controllers SMI Grabber Device 3. Compatible Software

The software originally bundled with EasyCap (like Ulead VideoStudio 10) often fails to work on modern Windows versions. Instead, use these modern alternatives: OBS Studio : Highly recommended. Add a Video Capture Device source and select "SMI Grabber Device". VirtualDub

: A lightweight tool excellent for direct capture and troubleshooting. VLC Media Player Open Capture Device and select the grabber. 4. Troubleshooting Common Issues No Video/Black Screen

: Ensure you have selected the correct input (Composite or S-Video) within your capture software. Code 28 Error

: This indicates the driver is missing or incompatible. Repeat the manual installation steps above using administrator rights. Interference/Grainy Image

: Connect the device directly to a rear USB port on your PC rather than a front port or hub to ensure stable power and reduce electromagnetic interference. Privacy Settings

: Make sure Windows 10 "Camera" privacy settings are toggled to allow apps to access your capture device. For more specific help, you can check the discussion on Microsoft Q&A or user-tested guides on 8bitmammoth Are you planning to capture or use the device for gaming consoles

The "easycap-sm-usb-007-windows-10-x64-drivers" refers to a specific type of device driver. Here's what I found:

The EasyCAP SM USB 007 is a video capture device that allows users to capture video and audio signals from external sources and transfer them to a computer. To function properly, the device requires a driver, which is software that enables the operating system to communicate with the device.

For Windows 10 x64 (64-bit), you can find and download the drivers for the EasyCAP SM USB 007 from various online sources, including:

To install the drivers, follow these general steps:

If you encounter any issues during the installation process, you can try:

Please note that using third-party driver websites can pose risks to your system's security and stability. It's always recommended to use official manufacturer websites or trusted sources for driver downloads.

The EasyCap SM-USB-007 is a popular, budget-friendly analog video capture card that often poses driver challenges on modern 64-bit systems. Because many of these devices are "clones" with varying chipsets, finding the exact Windows 10 x64 driver can be the difference between a working setup and a "Device not recognized" error. Where to Find the Drivers

Most users successfully resolve compatibility issues by using community-maintained repositories. A highly reliable source for these specific x64 drivers is the samuelcarreira GitHub repository. This repository provides the necessary .inf and binary files required for Windows 10 to recognize the device as an SMI Grabber Device. Installation Guide

To install the drivers manually on Windows 10 x64, follow these steps:

Preparation: Create a System Restore Point before proceeding to ensure you can revert changes if needed.

Download: Clone or download the ZIP file from the GitHub repository and extract it to a local folder. Manual Install:

Right-click the SmiUsbGrabber3C.inf file within the extracted folder and select Install.

Alternatively, open Device Manager, right-click the "Unknown Device" (likely listed as SM-USB 007), select Update Driver, and choose Browse my computer for drivers. Point Windows to the folder where you unzipped the drivers.

Verification: Once installed, the device should appear under Sound, video and game controllers in Device Manager as "SMI Grabber Device" or "OEM Capture". Troubleshooting Tips

Hardware ID Check: If the driver fails to install, verify your device's Hardware ID in Device Manager. On the Details tab, check if the ID matches the one supported by these drivers (typically related to the SMI chipset).

Legacy Drivers: Some users find that older Windows 7 64-bit drivers still function correctly on Windows 10 when installed manually via the "Browse my computer" method.

Audio Issues: If you have video but no sound, ensure that the "SMI Grabber" is selected as the active recording device in your capture software (like OBS or AMCap).

Do you need help configuring OBS or another software to start capturing video from your EasyCap once the driver is installed?

EasyCap USB TV 007(usbtv007) - Driver installation for Windows 10

If you've plugged in your analog capture card and Windows 10 isn't recognizing it, you likely need a specific SMI Grabber driver to bridge the gap. 1. Verify Your Hardware

Before installing, ensure your device matches the internal ID that this driver supports: Open Device Manager (right-click the Start button). Find the unknown device (usually listed as "SM-USB 007"). Right-click it > Properties > Details tab.

Change the dropdown to Hardware IDs. It should include USB\VID_1C88&PID_0007. 2. Installation Steps

Create a Restore Point: Since these are unofficial drivers, always create a System Restore Point before proceeding.

Download the Files: Access the EasyCap SM USB 007 Windows 10 Drivers on GitHub. Download and unzip the repository.

Install the INF: Locate the file named SmiUsbGrabber3C.inf. Right-click it and select Install.

Confirm Success: Check your Device Manager again. Under "Sound, video and game controllers," you should now see SMI Grabber Device listed without any yellow warning icons. 3. Pro Tips for Better Video

Use OBS Studio: For capturing the actual footage, OBS Studio is often more stable than the software bundled with the device.

Deinterlacing: Analog video often looks "jagged" on modern monitors. In your capture software, enable "Deinterlacing" (usually under Video Properties) to smooth out the motion.

Are you planning to use this for digitizing old VHS tapes, or are you connecting a different type of analog device?

EasyCap USB TV 007(usbtv007) - Driver installation for Windows 10

Here is comprehensive content regarding the EasyCap SM-USB-007 Windows 10 x64 Drivers, structured as a troubleshooting guide and resource article.

A: The EasyCAP has no onboard hardware encoding. Lag is normal. Use Preview mode in OBS or lower the FPS to 25 or 29.97. For archiving, capture raw then compress later.